[mythtv-users] Re: mythtv-users Digest, Vol 27, Issue 2
Gregg
3gemail at gmail.com
Fri Apr 1 15:57:14 UTC 2005
I have the same issue. I gave up on zsnes and switched to snes9x it
detects the gamepads correctly everytime, Although I still havent
figured out how to start it in full screen mode yet.
-Gregg
> All,
>
> I have a USB Logitech Wingman Rumblepad and a USB Microsoft Sidewinder Pro. When I use the Microsoft one with zSNES it's always detected the same. What I mean by that is, when you run zsnes with a joystick plugged in it spits out a line that says how many axis, buttons, hats, and balls it has. I can see the zsnes output when I run it from mythfrontend in the mythfrontend log file. When I run zSNES from a command prompt with my Rumblepad plugged in it gives me this:
>
> ---- zSNES executed from the command prompt ----
> $ /usr/local/bin/zsnes -cs -z -r 3 -m -j "/games/MyGame.smc"
> Hello the gui should now be off.
> ZSNES vPre 1.43, (c) 1997-2005, ZSNES Team
> Be sure to check http://www.zsnes.com/ for the latest version.
> Please report crashes to zsnes-devel at lists.sourceforge.net.
>
> ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
> ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
> and you are welcome to redistribute it under certain conditions;
> please read 'LICENSE.TXT' thoroughly before doing so.
>
> Use ZSNES -? for command line definitions.
>
> File opened successfully!
> Device 0 Logitech Inc. WingMan RumblePad
> 7 axis, 10 buttons, 0 hats, 0 balls
> ---- done with execution ----
>
> Now, the weird thing happens when I run zSNES from mythfrontend with the same device still plugged in. When I choose MyGame, it gives me this:
>
> ---- zSNES executed from mythfrontend ----
> /usr/local/bin/zsnes -cs -z -r 3 -m -j "/games/MyGame.smc"
> Hello the gui should now be off.
> ZSNES vPre 1.43, (c) 1997-2005, ZSNES Team
> Be sure to check http://www.zsnes.com/ for the latest version.
> Please report crashes to zsnes-devel at lists.sourceforge.net.
>
> ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
> ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
> and you are welcome to redistribute it under certain conditions;
> please read 'LICENSE.TXT' thoroughly before doing so.
>
> Use ZSNES -? for command line definitions.
>
> File opened successfully!
> Device 0 Logitech Inc. WingMan RumblePad
> 5 axis, 9 buttons, 1 hats, 0 balls
> ---- done with execution ----
>
> Notice the weirdness? It totally changed all the device controls! When I try to set up my rumblepad from a command prompt, and then use it in mythgame it doesn't work correctly. I think it's due to this but I don't know how to fix it. I used all the same switches in my command prompt run so it should be similar. I thought maybe it was joystick navigation in myth conflicting with mythgame so I tried recompiling with the --disable-joystick-menu but it didn't help. Could mythfrontend/mythgame be affecting how the joystick is detected in zSNES??
>
> Thanks,
> -Greg
>
> --- Running Conditions ---
> 939pin Athlon 64 3200+
> OS - Standard Issue Debian (32-bit)
> MythTV - CVS Version (last updated 3/31/2005)
> Capture Card - pcHDTV HD-3000
> Drivers - Using DVB (kernel 2.6.11.5)
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://mythtv.org/pipermail/mythtv-users/attachments/20050331/4fa37390/attachment.htm
>
> ------------------------------
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
> End of mythtv-users Digest, Vol 27, Issue 2
> *******************************************
>
More information about the mythtv-users
mailing list