[mythtv-users] Re: AMD64 and FC2 installation problems
brad at sonaural.com
Mon Sep 27 12:23:04 EDT 2004
Thanks Axel. I've subscribed (I think. No "thanks for joining" email yet!)
Further question: even though some mythtv modules are not yet ready for
64bit, the main ones seem to be there. Can I still run mythtv for the
most part (considering I get ivtv running, of course)
Or should I use another motherboard?
Axel Thimm wrote:
>On Mon, Sep 27, 2004 at 07:43:59AM -0700, Brad Fuller wrote:
>>Axel Thimm wrote:
>>>Before even considering myth, have you confirmed your video
>>>drivers work under x86_64? If yes, which are you using (asking out
>>>of personal interest).
>>Thanks for the message. Are you refering to the video capture card?
>>[lspci and dmesg moved to further below]
>>But, I receive the following error when trying -p = 1 thru 8
>>cat /dev/video0 > /tmp/test_capture.mpg
>>cat: /dev/video0: Input/output error
>>Does this mean my ivtv is working ok?
>Looks like it does not work. So before going into myth, you should
>make sure you can at least capture a stream like above.
>It would be good to join the ivtv-devel lists (Cc'ed and Reply-To set
>to there) and help testing ivtv on x86_64.
>>so, I have a PVR-250. I get the following after this: /sbin/lspci -v
>>00:0a.0 Multimedia video controller: Internext Compression Inc iTVC16
>>(CX23416) MPEG-2 Encoder (rev 01)
>> Subsystem: Hauppauge computer works Inc. WinTV PVR 250
>> Flags: bus master, medium devsel, latency 64, IRQ 153
>> Memory at e4000000 (32-bit, prefetchable)
>> Capabilities:  Power Management version 2
>>Doing a /bin/dmesg |grep ivtv also looked ok -- to me at least:
>>ivtv: ==================== START INIT IVTV ====================
>>ivtv: version 0.1.10 (0.1.10pre2-ck108k) loading
>>ivtv: Linux version: 2.6.8-1.521 gcc-3.3
>>ivtv: In case of problems please include the debug info
>>ivtv: between the START INIT IVTV and END INIT IVTV lines when
>>ivtv: mailing the ivtv-devel mailinglist.
>>ivtv: Autodetected WinTV PVR 250 card
>>ivtv: Found an iTVC16 based chip
>>ivtv: VIA PCI device: 0x0204 vendor: 0x1106
>>ivtv: i2c attach [client=tveeprom,ok]
>>tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
>>ivtv: i2c attach [client=(tuner unset),ok]
>>saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>>ivtv: i2c attach [client=saa7115,ok]
>>msp34xx: ivtv version
>>ivtv: i2c attach [client=MSP3445G-B8,ok]
>>ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model
>>0x00891615, Revision 0x00000000
>>ivtv: NTSC tuner detected
>>ivtv: Radio detected
>>ivtv: Encoder revision: 0x02040011
>>ivtv: Configuring WinTV PVR 250 card with 5 streams
>>ivtv: Create DMA stream 0 using 16 131072 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 0 minor 0
>>ivtv: Create DMA stream 1 using 16 131072 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 1 minor 32
>>ivtv: Create stream 2 using 512 4096 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 2 minor 224
>>ivtv: Create DMA stream 3 using 16 131072 byte buffers 2097152 kbytes total
>>ivtv: Registered v4l2 device, streamtype 3 minor 24
>>ivtv: Create stream 4
>>ivtv: Registered v4l2 device, streamtype 4 minor 64
>>ivtv: Setting Tuner 50
>>ivtv: Setting audio matrix to input 3, output 1
>>ivtv: Switching standard to NTSC.
>>ivtv: Initialized WinTV PVR 250, card #0
>>ivtv: ==================== END INIT IVTV ====================
>mythtv-users mailing list
>mythtv-users at mythtv.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the mythtv-users