[mythtv-users] Cannot switch to DVB channel unless (all) other cards are busy

[Roger James]

I have a setup with two capture cards. One analogue(PVR-350) and one
digital(Nova-T).

 

All appears tobe working OK at the hardware level.

 

I have 5 channels in my channel list 1-4 are analogue terrestrial 5 is
digital terrestrial.

 

If the analogue card is idle then selecting live tv switches to the default
analogue channel. I if then try to select the digital channel (5) either by
number key or by up down, then the display freezes as per usual channel
change but then reverts back to the analogue channel.

 

However if the analogue card is busy recording a show then selecting live tv
results in the default (and only) digital channel being shown. Help!!!!

 

Putting the log level to all on the backend does not show any error
messages, but also does not show any obvious attempt to switch to the
digital card

 

2004-10-26 16:28:09 6       128000

2004-10-26 16:28:09 6       128000

2004-10-26 16:28:09 6       128000

2004-10-26 16:28:09 6       128000

2004-10-26 16:28:10 1       1

2004-10-26 16:28:11 6       128000

2004-10-26 16:28:11 6       128000

2004-10-26 16:28:11 2       ok

2004-10-26 16:28:11 TuneTo(21) curList[i].freq(471250)

2004-10-26 16:28:11 TuneToFrequency(7540)

2004-10-26 16:28:11 2       ok

2004-10-26 16:28:11 16      1[]:[]1021313024

2004-10-26 16:28:11 16      1[]:[]1021313024

2004-10-26 16:28:11 16      1[]:[]1021313024

2004-10-26 16:28:11 16      1[]:[]1021313024

2004-10-26 16:28:11 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:12 16      1[]:[]1021313024

2004-10-26 16:28:13 16      1[]:[]1020999744

2004-10-26 16:28:13 6       128000

2004-10-26 16:28:13 6       128000

2004-10-26 16:28:13 6       128000

2004-10-26 16:28:13 16      1[]:[]1021161536

2004-10-26 16:28:13 16      1[]:[]1021120576

2004-10-26 16:28:13 16      1[]:[]1021038656

2004-10-26 16:28:13 16      1[]:[]1021038656

2004-10-26 16:28:13 6       128000

2004-10-26 16:28:13 246     A Place in the Sun[]:[] []:[]Series on holiday
...

2004-10-26 16:28:13 8       0[]:[]28

2004-10-26 16:28:14 6       128000

2004-10-26 16:28:14 6       128000

2004-10-26 16:28:14 6       128000

2004-10-26 16:28:15 6       128000

2004-10-26 16:28:15 6       128000

2004-10-26 16:28:15 6       128000

 

My setup uses a single Video source, with which both cards are associated.

 

In the channel editor I set up the digital channel by leaving the
video4linux channel number blank, and setting the DVB settings are expected.
The reverse is true for the analog channels.

 

What am I doing wrong? Help!

 

Roger

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20041026/83db3e54/attachment.html