[mythtv-users] Help w/PVR-350 TV-Out - FC2 - MythTV 0.16

renwick robinson renwick_robinson at yahoo.com
Mon Oct 4 10:36:27 EDT 2004


Thanks in advance for your help with this Mike - Ren

I have attached the out put you asked to see at the
end of this message.

> I have not been able to get TV-Out to work with my
current setup.  I 
> have followed Jarod's guide to the letter, but to no
avail.
>
> All of the tests and configurations seem to work
correctly and I can 
> record and in fact playback recording using MythTV,
but no TV-Out!!
>
> When I try to run "Watch TV' from MythFrontend, I
get black screens 
on 
> both TV and Monitor.  It also kills the backend. 
Here is the output 
> from the window running the:
>
> [mythtv at reactor mythtv]$ mythfrontend > qwe.qwe
> Error loading image file: 
/usr/share/mythtv/themes/default/NOTHING.png
> Errm, event socket just closed.
> Remote encoder not responding.

You are using the ivtvdev X driver, correct?  If so,
then please post 
the ivtv init section.  You can obtain this from your
log file 
(assuming 
/var/log/messages) with:

tac /var/log/messages |
sed -n '/=  END INIT IVTV  =/,/= START INIT IVTV =/p;
         /= START INIT IVTV =/q' |
tac

Mike
[root at reactor root]# tac /var/log/messages |
> sed -n '/=  END INIT IVTV  =/,/= START INIT IVTV
=/p;
>          /= START INIT IVTV =/q' |
> tac
Oct  3 23:32:56 reactor kernel: ivtv:
==================== START INIT IVTV =====
===============
Oct  3 23:32:56 reactor kernel: ivtv: version 0.1.10
(0.1.10pre2-ck108k) loading

Oct  3 23:32:56 reactor kernel: ivtv: Linux version:
2.6.8-1.521 686 REGPARM 4KS
TACKS gcc-3.3
Oct  3 23:32:56 reactor kernel: ivtv: In case of
problems please include the deb
ug info
Oct  3 23:32:56 reactor kernel: ivtv: between the
START INIT IVTV and END INIT I
VTV lines when
Oct  3 23:32:56 reactor kernel: ivtv: mailing the
ivtv-devel mailinglist.
Oct  3 23:32:56 reactor kernel: ivtv: Autodetected
WinTV PVR 350 card
Oct  3 23:32:56 reactor kernel: ivtv: Found an iTVC15
based chip
Oct  3 23:32:56 reactor kernel: ACPI: PCI interrupt
0000:00:08.0[A] -> GSI 10 (l
evel, low) -> IRQ 10
Oct  3 23:32:56 reactor kernel: ivtv: Unreasonably low
latency timer, setting to
 64 (was 32)
Oct  3 23:32:56 reactor kernel: ivtv: VIA PCI device:
0x0305 vendor: 0x1106
Oct  3 23:32:56 reactor kernel: tveeprom: Hauppauge:
model = 48132, rev = J323,
serial# = 6813757
Oct  3 23:32:56 reactor kernel: tveeprom: tuner =
Philips FM1236 (idx = 23, type
 = 2)
Oct  3 23:32:57 reactor kernel: tveeprom: tuner fmt =
NTSC(M) (eeprom = 0x08, v4
l2 = 0x00001000)
Oct  3 23:32:57 reactor kernel: tveeprom:
audio_processor = MSP3440 (type = 11)
Oct  3 23:32:57 reactor kernel: ivtv: i2c attach
[client=tveeprom[0],ok]
Oct  3 23:32:57 reactor kernel: ivtv: Tuner Type 2,
Tuner formats 0x00001000, Ra
dio: yes, Model 0x00a93493, Revision 0x00000001
Oct  3 23:32:57 reactor kernel: ivtv: NTSC tuner
detected
Oct  3 23:32:57 reactor kernel: ivtv: Radio detected
Oct  3 23:32:57 reactor kernel: tuner: chip found at
addr 0xc2 i2c-bus ivtv i2c
driver #0
Oct  3 23:32:57 reactor kernel: ivtv: i2c attach
[client=(tuner unset),ok]
Oct  3 23:32:57 reactor kernel: saa7115: starting
probe for adapter ivtv i2c dri
ver #0 (0x10005)
Oct  3 23:32:57 reactor kernel: saa7115: detecting
saa7115 client on address 0x4
2
Oct  3 23:32:57 reactor kernel: saa7115: writing init
values
Oct  3 23:32:57 reactor canna:  succeeded
Oct  3 23:32:57 reactor kernel: ivtv: i2c attach
[client=saa7115[0],ok]
Oct  3 23:32:57 reactor kernel: saa7115: status: (1E)
0x09, (1F) 0xc0
Oct  3 23:32:57 reactor kernel: saa7127: video encoder
driver version V 0.3 load
ed
Oct  3 23:32:57 reactor kernel: saa7127: Selecting
NTSC video Standard
Oct  3 23:32:57 reactor kernel: saa7127: Selecting
S-Video+Composite
Oct  3 23:32:57 reactor kernel: saa7127: Turn WSS off
Oct  3 23:32:57 reactor kernel: saa7127: Widescreen
Mode 4:3 Full Format
Oct  3 23:32:57 reactor kernel: saa7127: Selecting
Normal Encoder Input
Oct  3 23:32:57 reactor kernel: saa7127: Enable Video
Output
Oct  3 23:32:57 reactor kernel: ivtv: i2c attach
[client=saa7127[0],ok]
Oct  3 23:32:57 reactor kernel: msp34xx: ivtv version
Oct  3 23:32:57 reactor kernel: msp34xx: init:
chip=MSP3448W-A2, has NICAM suppo
rt, simple (D) mode, simpler (G) no-thread mode
Oct  3 23:32:57 reactor kernel: msp34xx: $Id$ compiled
on: Sep  9 2004 17:13:54
Oct  3 23:32:57 reactor crond: crond startup succeeded
Oct  3 23:32:57 reactor kernel: ivtv: i2c attach
[client=MSP3448W-A2,ok]
Oct  3 23:32:58 reactor lircd 0.7.0pre7[2496]:
lircd(any) ready
Oct  3 23:32:58 reactor lircd: lircd startup succeeded
Oct  3 23:32:58 reactor kernel: ivtv: Encoder
revision: 0x02040011
Oct  3 23:32:58 reactor kernel: ivtv: Decoder
revision: 0x02020023
Oct  3 23:32:58 reactor kernel: ivtv: Configuring
WinTV PVR 350 card with 9 stre
ams
Oct  3 23:32:58 reactor kernel: ivtv: Create DMA
stream 0 using 16 131072 byte b
uffers  2097152 kbytes total
Oct  3 23:32:58 reactor kernel: ivtv: Registered v4l2
device, streamtype 0 minor
 0
Oct  3 23:32:58 reactor kernel: ivtv: Create DMA
stream 1 using 16 131072 byte b
uffers  2097152 kbytes total
Oct  3 23:32:58 reactor kernel: ivtv: Registered v4l2
device, streamtype 1 minor
 32
Oct  3 23:32:58 reactor kernel: ivtv: Create stream 2
using 512 4096 byte buffer
s  2097152 kbytes total
Oct  3 23:32:58 reactor kernel: ivtv: Registered v4l2
device, streamtype 2 minor
 224
Oct  3 23:32:58 reactor kernel: ivtv: Create DMA
stream 3 using 16 131072 byte b
uffers  2097152 kbytes total
Oct  3 23:32:58 reactor kernel: ivtv: Registered v4l2
device, streamtype 3 minor
 24
Oct  3 23:32:58 reactor kernel: ivtv: Create stream 4
Oct  3 23:32:58 reactor kernel: ivtv: Registered v4l2
device, streamtype 4 minor
 64
Oct  3 23:32:58 reactor kernel: ivtv: Create DMA
stream 5 using 8 131072 byte bu
ffers  1048576 kbytes total
Oct  3 23:32:58 reactor kernel: ivtv: Registered v4l2
device, streamtype 5 minor
 16
Oct  3 23:32:58 reactor kernel: ivtv: Create stream 6
using 512 4096 byte buffer
s  2097152 kbytes total
Oct  3 23:32:59 reactor kernel: ivtv: Registered v4l2
device, streamtype 6 minor
 228
Oct  3 23:32:59 reactor kernel: ivtv: Create stream 7
Oct  3 23:32:59 reactor kernel: ivtv: Registered v4l2
device, streamtype 7 minor
 232
Oct  3 23:32:59 reactor kernel: ivtv: Create DMA
stream 8 using 8 131072 byte bu
ffers  1048576 kbytes total
Oct  3 23:32:59 reactor kernel: ivtv: Registered v4l2
device, streamtype 8 minor
 48
Oct  3 23:32:59 reactor kernel: ivtv: Setting Tuner 2
Oct  3 23:32:59 reactor kernel: tuner: type set to 2
(Philips NTSC (FI1236,FM123
6 and compatibles)) by ivtv i2c driver #0
Oct  3 23:32:59 reactor kernel: ivtv: Setting audio
matrix to input 3, output 1
Oct  3 23:32:59 reactor kernel: ivtv: Switching
standard to NTSC.
Oct  3 23:32:59 reactor kernel: saa7115: decoder set
norm NTSC
Oct  3 23:32:59 reactor kernel: saa7115: set audio:
0x01
Oct  3 23:32:59 reactor kernel: saa7127: Setting
Encoder Video Standard
Oct  3 23:32:59 reactor kernel: saa7127: Set NTSC
Video Mode
Oct  3 23:32:59 reactor kernel: saa7127: Selecting
NTSC video Standard
Oct  3 23:32:59 reactor kernel: ivtv: Initialized
WinTV PVR 350, card #0
Oct  3 23:32:59 reactor kernel: ivtv:
====================  END INIT IVTV  =====
===============



		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail 


More information about the mythtv-users mailing list