[mythtv-users] Guide too big / fonts too small
David Carlin
djc6 at cwru.edu
Sun Nov 28 07:08:45 UTC 2004
Rob,
I have an analog cable system. I have the coaxial cable from my wall
plugged into the female coax connector on the card marked TV (the 2nd
one is not an output; it's an input for an FM antenna).
I then have the 'splitter cable' or whatever you want to call it,
plugged into the card with the svideo/composite/left audio/right audio
connectors on it. I am using three RCA cables, one composite two audio
to go to the TV. I have no issues with the audio output, I am not
using my sound card.
-David
On Nov 28, 2004, at 1:13 AM, Rob Greene wrote:
> I'm using the TV Connector, so I that doesn't apply, right? (If I'm
> messed
> up, how do I separate the sound from a coax connector?)
> -Rob
>
> -----Original Message-----
> From: mythtv-users-bounces at mythtv.org
> [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of Michael Cheshire
> (Mailing Lists)
> Sent: Saturday, November 27, 2004 11:45 PM
> To: Discussion about mythtv
> Subject: Re: [mythtv-users] Guide too big / fonts too small
>
> Where are you plugging in your sound? To capture sound with video on
> your
> PVR-350 you'll have to use the input socket on your PVR-350 NOT your
> sound
> card.
>
> M.
> ----- Original Message -----
> From: "Rob Greene" <greener at charter.net>
> To: "'Discussion about mythtv'" <mythtv-users at mythtv.org>
> Sent: Sunday, November 28, 2004 4:05 PM
> Subject: RE: [mythtv-users] Guide too big / fonts too small
>
>
>> David -
>>
>> I've been doing the same thing. Started with FC3 but moved back to
>> FC2.
>> Did you have any issues with capturing sound? I still don't get
>> sound,
>> and
>> I cannot figure it out.
>>
>> Thanks!
>> -Rob
>>
>> -----Original Message-----
>> From: mythtv-users-bounces at mythtv.org
>> [mailto:mythtv-users-bounces at mythtv.org] On Behalf Of David Carlin
>> Sent: Saturday, November 27, 2004 9:03 PM
>> To: mythtv-users at mythtv.org
>> Subject: [mythtv-users] Guide too big / fonts too small
>>
>> Hey,
>>
>> Just started using MythTV/Linux following Jarod's guide on a fresh
>> Fedora Core 2 install. I have a brand new PVR350 card and the list
>> archives have helped me with many issues related to the new 350's
>> (like
>> the new remotes not working, screen appearing in all green, etc..).
>>
>> Anyways, I've adjusted my mythfrontend appearance settings to get the
>> GUI to fit right, but the program guide and such during live TV don't
>> seem to have these settings applied. Worse, when I go back into the
>> GUI after using the program guide, my offsets seem to get changed
>> slightly. Restarting the frontend puts them back.
>>
>> How do I configure the size of stuff during live TV? Also, why are
>> the
>> fonts in the program guide so unimaginably small? It's totally
>> illegible, where as the GUI stuff is crystal clear.
>>
>> I'm very new to this xorg.conf stuff, I've never really used Linux
>> before - I come from a Solaris background. I'm using 640x480 mode in
>> the monitor/screen section settings, and I've set DisplaySize 160 120
>> under monitor section per some suggestions I google'd.
>>
>> Thanks!
>>
>>
>>
>>
>
>
> -----------------------------------------------------------------------
> -----
> ----
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list