[mythtv-users] pvr350 + lirc

[Ryszard]

i've downloaded, compiled and installed lirc-0.7.0pre8, i have the
hauppauge lircd.conf in the /etc directory.

i've got the lirc_dev and lirc_i2c modules loaded, and even tho'v i've
compiled withthe haupauge driver option its not showing it (altho i
suspect this is correct).  i also seem to have teh requisite stuff in
/dev.

having a look in the sslog also showsit has found the card  remote.

if i run irw to try and see the ir reciever working i get nothing,
however if i do an strace on the lircd process i see it capturing the
IR commands from the remote.

so, i know it works, or atleast is receiving the signal, but it doesnt
seem to be handing it off to anything!

does anyone have any ideas about this?

-----8<---------------------------
root at myth1:/usr/src# lircd --driver=hauppauge
Driver `hauppauge' not supported.
Supported drivers:
        default
-----8<---------------------------
root at myth1:/usr/src# dir /dev/lirc*
crw-rw----  1 root root 61, 0 Nov 13 16:36 /dev/lirc
srw-rw-rw-  1 root root     0 Nov 24 18:30 /dev/lircd=
prw-rw-rw-  1 root root     0 Nov 13 16:36 /dev/lircm|
root at myth1:/usr/src#    
-----8<--------------------------- 
select(9, [4 7 8], NULL, NULL, NULL)    = 1 (in [7])
gettimeofday({1101318102, 562311}, NULL) = 0
read(7, "\37\265", 2)                   = 2
gettimeofday({1101318102, 563547}, NULL) = 0
gettimeofday({1101318102, 563977}, NULL) = 0
select(9, [4 7 8], NULL, NULL, NULL      
-----8<---------------------------
Nov 24 18:27:53 myth1 kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
Nov 24 18:27:53 myth1 kernel: ivtv: i2c attach [client=Hauppauge IR,ok]
Nov 24 18:27:53 myth1 kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
-----8<---------------------------