[mythtv-users] TV Wonder with FC2
Lance_Knoblock at uccsn.nevada.edu
Lance_Knoblock at uccsn.nevada.edu
Mon Nov 15 21:05:23 UTC 2004
Hello,
Having no luck making this work. I have Mythtv installed and
working but cannot watch tv. For now I'm just working on the pc, no
tv-out. Doesn't matter if I use Watch TV in myth, xawtv, or tvtime. I
only get what looks like scrambled crap on the screen. For now I am also
just plugging in an off-air antenna. I know this works because I can plug
it into the ntsc tuner on the tv and all is fine.
I have setup using Jarod's guide and modules from atrpms.net. Here
is what my /etc/modprobe.conf looks like:
alias eth0 3c59x
alias char-major-81-0 bttv
options bttv autoload=1 card=63 radio=0 pll=1 tuner=2
alias usb-controller uhci-hcd
# nvidia kernel module
alias char-major-195 nvidia-1_0-6111
alias snd-card-0 snd-ens1370
install snd-ens1370 /sbin/modprobe --ignore-install snd-ens1370 &&
/usr/sbin/alsactl restore >/dev/null 2>&1 || :
remove snd-ens1370 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; };
/sbin/modprobe -r --ignore-remove snd-ens1370
I've put in the options for bttv although I believe it autodetects
properly as well. Here is the /var/log/messages:
Nov 15 12:25:49 mythtv kernel: Linux video capture interface: v1.00
Nov 15 12:25:49 mythtv kernel: bttv: driver version 0.9.15 loaded
Nov 15 12:25:49 mythtv kernel: bttv: snapshot date 2004-10-05
Nov 15 12:25:49 mythtv kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Nov 15 12:25:49 mythtv kernel: bttv: Host bridge needs ETBF enabled.
Nov 15 12:25:49 mythtv kernel: bttv: Bt8xx card found (0).
Nov 15 12:25:49 mythtv kernel: PCI: Enabling device 0000:00:0e.0 (0104 ->
0106)
Nov 15 12:25:49 mythtv kernel: PCI: Found IRQ 11 for device 0000:00:0e.0
Nov 15 12:25:49 mythtv kernel: PCI: Sharing IRQ 11 with 0000:00:0e.1
Nov 15 12:25:49 mythtv kernel: bttv0: Bt878 (rev 17) at 0000:00:0e.0, irq:
11, latency: 132, mmio: 0xe8001000
Nov 15 12:25:49 mythtv kernel: bttv0: detected: ATI TV Wonder [card=63],
PCI subsystem ID is 1002:0001
Nov 15 12:25:49 mythtv kernel: bttv0: using: ATI TV-Wonder [card=63,insmod
option]
Nov 15 12:25:49 mythtv kernel: bttv0: enabling ETBF (430FX/VP3
compatibilty)
Nov 15 12:25:49 mythtv portmap: portmap startup succeeded
Nov 15 12:25:49 mythtv kernel: bttv0: using tuner=2
Nov 15 12:25:49 mythtv kernel: bttv0: i2c: checking for MSP34xx @ 0x80...
found
Nov 15 12:25:49 mythtv kernel: msp34xx: init: chip=MSP3445G-B8 +nicam
+simple +simpler +radio mode=simpler
Nov 15 12:25:49 mythtv kernel: bttv0: i2c: checking for TDA9875 @ 0xb0...
not found
Nov 15 12:25:49 mythtv kernel: bttv0: i2c: checking for TDA7432 @ 0x8a...
not found
Nov 15 12:25:49 mythtv kernel: tuner: chip found at addr 0xc0 i2c-bus
bt878 #0 [sw]
Nov 15 12:25:49 mythtv kernel: tuner: type set to 2 (Philips NTSC
(FI1236,FM1236 and compatibles)) by bt878 #0 [sw]
Nov 15 12:25:49 mythtv kernel: bttv0: registered device video0
Nov 15 12:25:49 mythtv kernel: bttv0: registered device vbi0
Nov 15 12:25:50 mythtv kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Any suggestions on what else I could try?
Thanks,
----------------------------------------------------
Lance Knoblock
knoblock at nevada.edu
UCCSN System Computing Services
Sr. Telecom Analyst
775.784.1989
----------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-users/attachments/20041115/f0c7eecc/attachment.html
More information about the mythtv-users
mailing list