[mythtv-users] PVR350 sound output not working after upgrade

[David Erickson]

I just saw this in my dmesg output...

ivtv: Finished with Mute

Is it muting the tuner audio? And how do i change this?

Dave


> Maybe this will help..
>
> When i try initialize saa7127 manually i get
>
> [root at pvr1 modules]# insmod saa7127 enable_output=1 output_select=0
> Using
> /lib/modules/2.4.20-35_39.rh9.at/updates/drivers/media/video/saa7127.o
> Warning: ignoring enable_output=1, no such parameter in this module
> Warning: ignoring output_select=0, no such parameter in this module
> Module saa7127 loaded, with warnings
>
> Now granted i'm using Jarod's instructions for fc1 since i haven't found a
> decent set directly for rh9 and it's the closest and what i used before to
> build this in the first place.
>
> This is my output from dmesg after rebooting...
>
> PCI: Setting latency timer of device 00:11.5 to 64
> Linux video capture interface: v1.00
> i2c-core.o: i2c core module version 2.8.2 (20031211)
> saa7127: video encoder driver version V 0.3 loaded
> ivtv: ==================== START INIT IVTV ====================
> ivtv: version 0.1.10 (0.1.10-48.3_pre2_ck100zz.rh9.at) loading
> ivtv: Linux version: 2.4.20-35_39.rh9.at
> ivtv: In case of problems please include the debug info
> ivtv: between the START INIT IVTV and END INIT IVTV lines when
> ivtv: mailing the ivtv-devel mailinglist.
> ivtv: Autodetected WinTV PVR 350 card
> ivtv: Found an iTVC15 based chip
> ivtv: Unreasonably low latency timer, setting to 64 (was 32)
> ivtv: pci: VIA detected device: 0x3099 vendor: 0x1106
> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
> ivtv: i2c attach [client=(tuner unset),ok]
> tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by
> insmod option
> tuner: The type=<n> insmod option will go away soon.
> tuner: Please use the tuner=<n> option provided by
> tuner: tv aard core driver (bttv, saa7134, ...) instead.
> saa7127: Selecting NTSC video Standard
> saa7127: Selecting S-Video+Composite
> saa7127: Turn WSS off
> saa7127: Widescreen Mode 4:3 Full Format
> saa7127: Selecting Normal Encoder Input
> saa7127: Enable Video Output
> ivtv: i2c attach [client=saa7127[0],ok]
> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
> saa7115: detecting saa7115 client on address 0x42
> saa7115: writing init values
> ivtv: i2c attach [client=saa7115[0],ok]
> saa7115: status: (1E) 0x09, (1F) 0xc0
> msp34xx: init: chip=MSP3448W-A2 +nicam +simple +radio
> ivtv: i2c attach [client=MSP3448W-A2,ok]
> msp3410: daemon started
> tveeprom: Hauppauge: model = 48132, rev = J323, serial# = 2754786
> tveeprom: tuner = Philips FM1236 (idx = 23, type = 2)
> tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
> tveeprom: audio_processor = MSP3440 (type = 11)
> ivtv: i2c attach [client=tveeprom[0],ok]
> ivtv: Tuner Type 2, Tuner formats 0x00001000, Radio: yes, Model
> 0x00a93493, Revision 0x00000001
> ivtv: NTSC tuner detected
> ivtv: Radio detected
> ivtv: Encoder revision: 0x02040024
> ivtv: Decoder revision: 0x02020023
> ivtv: Configuring WinTV PVR 350 card with 9 streams
> ivtv: Create DMA stream 0 using 128 buffers of size 32768
> ivtv: Create DMA stream 1 using 128 buffers of size 32768
> ivtv: Create stream 2 using 128 buffers of size 52224
> ivtv: Create DMA stream 3 using 128 buffers of size 32768
> ivtv: Create stream 4
> ivtv: Create DMA stream 5 using 16 buffers of size 32768
> ivtv: Create stream 6 using 128 buffers of size 4096
> ivtv: Create stream 7
> ivtv: Create DMA stream 8 using 20 buffers of size 32768
> ivtv: Setting Tuner 2
> ivtv: Setting audio matrix to input 3, output 1
> ivtv: Switching standard to NTSC.
> saa7115: decoder set norm NTSC
> saa7115: set audio: 0x01
> saa7127: Setting Encoder Video Standard
> saa7127: Set NTSC Video Mode
> saa7127: Selecting NTSC video Standard
> ivtv: Initialized WinTV PVR 350, card #0
> ivtv: ====================  END INIT IVTV  ====================
>
>
>
>
>> I saved my database and current recordings and attempted to rebuild my
>> mythtv box from scratch still using Redhat 9.  After rebuilding.  My old
>> recordings still play sound out the pvr350 but new recordings or livetv
>> do
>> not have any audio out of the card? Otherwise everything looks good. Any
>> idea what could be causing this?
>>
>> I did try to search for this on the mailing list archives but didn't
>> find
>> anything that matched my situation.
>>
>> Dave
>> _______________________________________________
>> mythtv-users mailing list
>> mythtv-users at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>>
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>