[mythtv-users] Re: PVR250MCE issues.

[Bryan Ware]

Installing the card with a clean install and am attempting to use the
Bleeding ivtv drivers and am recieving this error... 

[root at myth-be1 etc]# /sbin/modprobe ivtv
modprobe: Can't locate module ivtv

lspci -v output:

02:0a.0 Multimedia video controller: Internext Compression Inc iTVC15
MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 4801
        Flags: bus master, medium devsel, latency 64, IRQ 11
        Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

02:0b.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
        Subsystem: Hauppauge computer works Inc.: Unknown device 4801
        Flags: bus master, medium devsel, latency 64, IRQ 10
        Memory at ec000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2

modules.conf:

path[toplevel]=/lib/modules/`uname -r`/updates
# default path
path[toplevel]=/lib/modules/`uname -r`

alias eth0 3c59x
alias usb-controller usb-uhci

# nvidia kernel module
alias char-major-195 nvidia-1.0-4363

# ivtv modules setup
alias char-major-81 videodev
alias char-major-81-0 ivtv
options ivtv ivtv_debug=1 mpg_buffers=90
options tuner type=2 # NTSC tuner
options msp3400 once=1 simple=1
add below ivtv msp3400 saa7115 tuner

# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.4 ---
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-ens1371
alias sound-slot-0 snd-ens1371
# --- END: Generated by ALSACONF, do not edit. ---


Let me know if you need anything else,
Bryan

On Sun, 2004-05-30 at 04:17, Axel Thimm wrote:
> On Sun, May 30, 2004 at 12:12:53AM -0400, Bryan Ware wrote:
> > K,
> > 	I see that there are know issues with the PVR250MCE and it causing hard
> > crashes ith the 0.9 ivtv drivers.
> 
> You need 0.10preX drivers, which are available in the
> bleeding/experimental section of ATrpms.
> 
> > I installed my myth box using JArod's Awesome guide, is there a way
> > to fix this problem using the atrpm ivtv package and not the source
> > code? I have read through the archives and that seems to be the way
> > to fix it, but I don't want to have to compile the code. I know, I
> > am lazy. As a side not, this is the second PVR250 card I have in my
> > system. the other one works great and is an oem version of the
> > card. let me know if there is any output messages that you all might
> > need.
> > 
> > Thanks,
> 
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
-- 
Bryan Ware <bryan at hb-computers.com>