[mythtv-users] can't change the channel
chuck
cferring at comcast.net
Sat Mar 27 18:21:27 EST 2004
Ok, I've tried this. I even dumped my mythconverge DB and started
over. still no luck with changing channels. I turned on verbose -all
and saw that mythfrontend is outputting the following lines several time
each time I try to change the channel:
2004-03-27 15:11:55 waiting for prebuffer...
2004-03-27 15:11:55 prebuffer wait timed out..
2004-03-27 15:11:55 waiting for prebuffer...
2004-03-27 15:11:55 prebuffer wait timed out..
2004-03-27 15:11:55 waiting for prebuffer...
2004-03-27 15:11:55 prebuffer wait timed out..
There are probably about 100 iterations for each attempted channel
change. Does anyone have any further pointers on what I should check
here?
Thanks,
-Chuck
On Thu, 2004-03-25 at 00:53, BP wrote:
> I've had this same problem a few times. Usually happens if my myth box
> loses internet connectivity for a little while. To fix it, I run
> mythsetup, tell it to dump the channel info, re-configure my tuner
> information then run mythfilldatabase. You could try just running
> mythfilldatabase by itself.
>
> Bryan
>
>
> chuck wrote:
>
> >I looked through the archives and I've seen similar issues but I haven't
> >found a solution there. Up until recently I was able to change the
> >channel in myth without a problem but now I can't change the channel.
> >I'm using a pvr 250 and ptune.pl changes the channel just fine.
> >
> >When I try to change the channel the it pauses for a moment like it's
> >trying to change the channel, then it resumes. When the OSD comes up
> >there is no program info. I went into the program guide and it appears
> >to be correctly populated.
> >
> >My system is mandrake 9.1 with ivtv with myth 14 and ivtv 1.9. Below is
> >the error output from when I tried to change the channel 3 times:
> >
> >Input #0, mpeg, from
> >'rbuf://127.0.0.1:6543/var/myth/buffer/ringbuf1.nuv':
> > Stream #0.0: Video: mpeg2video, 720x480, 29.97 fps
> > Stream #0.1: Audio: mp2, 48000 Hz, stereo, 384 kb/s
> >QDateTime::fromString: Parameter out of range
> >QDateTime::fromString: Parameter out of range
> >QDateTime::fromString: Parameter out of range
> >QDateTime::fromString: Parameter out of range
> >QDateTime::fromString: Parameter out of range
> >QDateTime::fromString: Parameter out of range
> >[mpeg2video @ 0x8259ba8]ac-tex damaged at 12 27
> >[mpeg2video @ 0x8259ba8]concealing errors
> >[mpeg2video @ 0x8259ba8]Warning MVs not available
> >
> >the "QDateTime::fromString: Parameter out of range" error seems to
> >happen twice each time I attempt to change the channel.
> >
> >Does anyone have any ideas as to what might be causing this?
> >
> >Thanks,
> >
> >-Chuck
> >
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >mythtv-users mailing list
> >mythtv-users at mythtv.org
> >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list