[mythtv-users] KnoppMyth no ptune.pl

[Thomas Kuster]

hello

i tested the knoppmyth with my vie epia me6000 and pvr350.
now i know how mythtv looks;-).

the frontend can not connect to the backend (server and client on the 
same maschine). why? i don't know.

the remote works fine.

the sound is very bad, with kernel 2.6.4 the sound was perfect, any 
tips?

what i had done:

then i try to bring up my pvr350 with the setup, nothing work.

switch to the console and try this tips:
http://www-isl.mach.uni-karlsruhe.de/~hi93/myth/mythtv_debian_epia_pvr350_walkthrough
i try tvout work fine, cat /dev/video >file.mpg work (picture, sound i 
don't know), load the driver with the correct tuner type tune the 
channel with ptune.pl (after i install Video-Frequencies-0.03.tar.gz, 
ivtv-0.1.9.tar.gz, Video-ivtv-0.12.tar.gz and libconfig-inifiles-perl):
#!/bin/bash

count=1           #Zähler auf Null setzen

#So lange durchlaufen  bis count nicht mehr unter 10 ist
while [ $count -le 126 ]
      do
        echo $count  #Zähler ausgeben
        ptune.pl -c $count
        count=$[$count+1]  #Zähler um eins erhöhen
      done

okay i see the testpicture from my video recorder (my video recorder is 
defect, so i couldn't play a cassette to check the sound).

now i install a new debian base system with kernel 2.4 (any tips which 
one, any patch?) and then try to setup the rest.

bye
thomas

cat /etc/modules.conf
### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade 
modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from 
ignoring
# the builtin defaults of a path-statement is encountered. Until all 
other
# packages use the new `add path'-statement this keep-statement is 
essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/1alsa
path[]=/lib/modules/extra/alsa
depfile=/lib/modules/extra/modules.dep
generic_stringfile=/lib/modules/extra/modules.generic_string
pcimapfile=/lib/modules/extra/modules.pcimap
isapnpmapfile=/lib/modules/extra/modules.isapnpmap
usbmapfile=/lib/modules/extra/modules.usbmap
parportmapfile=/lib/modules/extra/modules.parportmap
ieee1394mapfile=/lib/modules/extra/modules.ieee1394map
pnpbiosmapfile=/lib/modules/extra/modules.pnpbiosmap

### update-modules: end processing /etc/modutils/1alsa

### update-modules: start processing /etc/modutils/KnoppMyth
include /etc/mythtv/modules/ivtv
include /etc/mythtv/modules/ivtv0

### update-modules: end processing /etc/modutils/KnoppMyth

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off            # Unix
# alias net-pf-2 off            # IPv4
# alias net-pf-3 off            # Amateur Radio AX.25
# alias net-pf-4 off            # IPX
# alias net-pf-5 off            # DDP / appletalk
# alias net-pf-6 off            # Amateur Radio NET/ROM
# alias net-pf-9 off            # X.25
# alias net-pf-10 off           # IPv6
# alias net-pf-11 off           # ROSE / Amateur Radio X.25 PLP
alias net-pf-17 af_packet       # Packet socket (tcpdump)
# alias net-pf-19 off           # Acorn Econet

alias via82cxxx via82cxxx_audio
alias char-major-10-175 agpgart
alias char-major-10-200 tun
#alias char-major-81    bttv
alias char-major-108    ppp_generic
alias /dev/ppp          ppp_generic
alias tty-ldisc-3       ppp_async
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0   loop_gen
alias loop-xfer-3       loop_fish2
alias loop-xfer-gen-10  loop_gen
alias cipher-2          des
alias cipher-3          fish2
alias cipher-4          blowfish
alias cipher-6          idea
alias cipher-7          serp6f
alias cipher-8          mars6
alias cipher-11         rc62
alias cipher-15         dfc2
alias cipher-16         rijndael
alias cipher-17         rc5

# Name inconsistency in 2.4 Kernel series
alias ide_cs ide-cs
alias usbcore off
alias autofs autofs4

# If both mousedev and usbmouse are insmodded, neither of them works 
right.
# Adding solution proposed by Kai Lehmann:
alias usbmouse mousedev
# Same for USB keyboards, which should be used in hid generic mode 
instead
alias usbkbd hid

### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa-0.9-knoppix
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 0.9.0-knoppix ---
alias char-major-116 snd
alias snd-card-0 snd-via82xx
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd major=116 cards_limit=1 device_gid=29 device_mode=0660
options snd-via82xx index=0
# --- END: Generated by ALSACONF, do not edit. ---


### update-modules: end processing /etc/modutils/alsa-0.9-knoppix

### update-modules: start processing /etc/modutils/apm
alias char-major-10-134 apm
alias /dev/apm_bios             /dev/misc/apm_bios
alias /dev/misc/apm_bios        apm
options apm power_off=1

### update-modules: end processing /etc/modutils/apm

### update-modules: start processing /etc/modutils/autofs
probe   autofs  autofs4 autofs

### update-modules: end processing /etc/modutils/autofs

### update-modules: start processing /etc/modutils/irda
alias tty-ldisc-11 irtty
# The following is for new kernel.
alias char-major-161 ircomm-tty

# The following is for old kernel.
alias char-major-60 ircomm_tty

# To be able to attach some dongles
alias irda-dongle-0 tekram
alias irda-dongle-1 esi
alias irda-dongle-2 actisys
alias irda-dongle-3 actisys
alias irda-dongle-4 girbil
alias irda-dongle-5 litelink
alias irda-dongle-6 airport
alias irda-dongle-7 old_belkin

# FIR device drivers.
# options smc-ircc ircc_irq= ircc_dma=
# alias irda0 smc-ircc
# options toshoboe max_baud=
# alias irda0 toshoboe
# options w83977af_ir io= io2= irq= qos_mtt_bits=
# alias irda0 w83977af_ir

# To use the NSC driver on a Thinkpad laptop: uncomment the following:
# options nsc-ircc dongle_id=0x09
# alias irda0 nsc-ircc

### update-modules: end processing /etc/modutils/irda

### update-modules: start processing /etc/modutils/linux-wlan-ng
# Aliases to tell insmod/modprobe which module to use when bringing up 
the
# wlan0 interface.

# Uncomment the line corresponding to the type of prism2 device you 
have.
alias wlan0 prism2_pci
#alias wlan0 prism2_usb
#alias wlan0 prism2_cs
#alias wlan0 prism2_plx


### update-modules: end processing /etc/modutils/linux-wlan-ng

### update-modules: start processing /etc/modutils/lirc
alias char-major-61 lirc_i2c

### update-modules: end processing /etc/modutils/lirc

### update-modules: start processing /etc/modutils/lvm-common
# The Logical Volume Manager uses these block and char numbers
alias block-major-58 lvm-mod
alias char-major-109 lvm-mod

### update-modules: end processing /etc/modutils/lvm-common

### update-modules: start processing /etc/modutils/madwifi
# Aliases to tell insmod/modprobe which module to use when bringing up 
the
# ath0 interface.

alias ath0 ath_pci


### update-modules: end processing /etc/modutils/madwifi

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp          ppp_generic
alias char-major-108    ppp_generic
alias tty-ldisc-3       ppp_async
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing /etc/modutils/raidtools2
alias md-personality-1 linear
alias md-personality-2 raid0
alias md-personality-3 raid1
alias md-personality-4 raid5

### update-modules: end processing /etc/modutils/raidtools2

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't 
loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info 
-t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t 
"setserial-module uload"
#
alias /dev/tts          serial
alias /dev/tts/0        serial
alias /dev/tts/1        serial
alias /dev/tts/2        serial
alias /dev/tts/3        serial
post-install serial /etc/init.d/setserial modload > /dev/null 
2> /dev/null
pre-remove serial /etc/init.d/setserial modsave  > /dev/null 
2> /dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc
# no warnings to stderr on KNOPPIX
insmod_opt=-q

### update-modules: end processing /etc/modutils/arch/i386