[mythtv-users] Problems with Gentoo + LIRC + Hauppauge Nexus-S
DVB Card
Jason Lixfeld
jason+lists.mythtv at lixfeld.ca
Tue Jun 29 12:50:01 EDT 2004
Just for the heck of it, I rebotted into 2.4.26, loaded the lirc_dev
module so I could capture it and show what's been going on with me on a
different kernel:
# lsmod
Module Size Used by Tainted: P
lirc_dev 8912 0 (unused)
stv0299 7796 0 (unused)
dvb-ttpci 309300 0 (unused)
dvb-core 43192 3 [stv0299 dvb-ttpci]
ath_pci 31392 1
wlan 48774 1 [ath_pci]
ath_hal 111824 1 [ath_pci]
# dmesg | grep lirc
lirc_dev: IR Remote Control driver registered, at major 61
# ls -al /dev/lirc*
crw-r--r-- 1 root root 61, 0 Jun 29 12:35 /dev/lirc
srw-rw-rw- 1 root root 0 Jun 29 12:35 /dev/lircd
prw-r--r-- 1 root root 0 Jun 29 12:35 /dev/lircm
Here's lirc from the gentoo startup. /dev/lirc/lirc0 doesn't exist,
but I'll try it anyway:
# /usr/sbin/lircd -d /dev/lirc/lirc0 -n
lircd 0.7.0pre4[2233]: lircd(hauppauge_dvb) ready
^z
[1]+ Stopped /usr/sbin/lircd -d /dev/lirc/lirc0 -n
# bg
[1]+ /usr/sbin/lircd -d /dev/lirc/lirc0 -n &
root at nebuchadnezzar misc # irw
lircd 0.7.0pre4[2233]: accepted new client on /dev/lircd
lircd 0.7.0pre4[2233]: could not get file information for
/dev/lirc/lirc0
lircd 0.7.0pre4[2233]: default_init(): Not a directory
lircd 0.7.0pre4[2233]: caught signal
[1]+ Terminated /usr/sbin/lircd -d /dev/lirc/lirc0 -n
Here's lirc by hand with /dev/lirc as the device.
# /usr/sbin/lircd -d /dev/lirc -n
lircd 0.7.0pre4[2236]: lircd(hauppauge_dvb) ready
^z
[1]+ Stopped /usr/sbin/lircd -d /dev/lirc -n
# bg
[1]+ /usr/sbin/lircd -d /dev/lirc -n &
root at nebuchadnezzar misc # irw
lircd 0.7.0pre4[2236]: accepted new client on /dev/lircd
lircd 0.7.0pre4[2236]: could not open /dev/lirc
lircd 0.7.0pre4[2236]: default_init(): No such device
lircd 0.7.0pre4[2236]: caught signal
[1]+ Terminated /usr/sbin/lircd -d /dev/lirc -n
On Jun 29, 2004, at 12:33 PM, Jason Lixfeld wrote:
> I've tried a couple different kernels (2.4.26 & 2.6.7-rc3-love2), lirc
> ebuild, and lirc CVS snapshot from source. I've been getting Unknown
> Device errors on 2.4.26 with lirc as a module so I gave up and tried
> the love sources with lircd statically comiled in (along with
> everything else to keep it simple). Now this "could not init hardware
> error". Alot of people seem to have a solution for the PVR cards via
> ivtv, but all the stuff I've found with regards to the nexus cards has
> been in german and google's translator doesn't do it much justice
> unfortunately.
>
> Here's what's going on right now:
>
> Kernel:
> ---------
> 2.6.7-rc3-love2:
>
> Card:
> -------
> Hauppauge Nexus-S DVB
>
> Emerge Line:
> -----------------
> ACCEPT_KEYWORDS="~x86" LIRC_OPTS="--with-driver=hauppauge_dvb" emerge
> lirc
>
> devices:
> -----------
> # ls /dev/lirc*
> /dev/lircd /dev/lircm
>
> /dev/lirc:
>
> irrecord:
> -----------
> # irrecord foo
> irrecord - application for recording IR-codes for usage with lirc
>
> Copyright (C) 1998,1999 Christoph Bartelmus(lirc at bartelmus.de)
>
> irrecord: could not init hardware (lircd running ? --> close it, check
> permissions)
>
> # /etc/init.d/lircd start
> * Running preup function
> * Wireless extensions not found for eth0
> * Please make sure that /etc/conf.d/net has $ifconfig_eth0 set
> * (or $iface_eth0 for old-style configuration)
> * Starting lircd...
> [ ok ]
> # ps xa|grep irc|grep -v grep
> 5982 ? S 0:00 /usr/sbin/lircd -d /dev/lirc/lirc0
> #
>
> What am I doing wrong here?
>
> .config
> ----------
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_KERNEL_IMAGE_BZIMAGE=y
> CONFIG_KERNEL_IMAGE="arch/i386/boot/bzImage"
> CONFIG_EXPERIMENTAL=y
> CONFIG_BROKEN=y
> CONFIG_BROKEN_ON_SMP=y
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> CONFIG_KALLSYMS=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_OBSOLETE_MODPARM=y
> CONFIG_KMOD=y
> CONFIG_X86_PC=y
> CONFIG_MK7=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_USE_3DNOW=y
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_TSC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> CONFIG_NOHIGHMEM=y
> CONFIG_BADRAM=y
> CONFIG_MTRR=y
> CONFIG_HAVE_DEC_LOCK=y
> CONFIG_ACPI=y
> CONFIG_ACPI_BOOT=y
> CONFIG_ACPI_INTERPRETER=y
> CONFIG_ACPI_AC=y
> CONFIG_ACPI_BATTERY=y
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_BUS=y
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_PCI=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_PCI=y
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_LEGACY_PROC=y
> CONFIG_PCI_NAMES=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_MISC=y
> CONFIG_FW_LOADER=y
> CONFIG_BLK_DEV_FD=y
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> CONFIG_IDE_TASKFILE_IO=y
> CONFIG_IDE_GENERIC=y
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> CONFIG_BLK_DEV_GENERIC=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> CONFIG_IDEDMA_PCI_AUTO=y
> CONFIG_BLK_DEV_ADMA=y
> CONFIG_BLK_DEV_IDEDMA=y
> CONFIG_IDEDMA_AUTO=y
> CONFIG_SCSI=y
> CONFIG_SCSI_QLA2XXX=y
> CONFIG_NET=y
> CONFIG_PACKET=y
> CONFIG_UNIX=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_NETFILTER=y
> CONFIG_IP_NF_CONNTRACK=y
> CONFIG_IP_NF_QUEUE=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_LIMIT=y
> CONFIG_IP_NF_MATCH_IPRANGE=y
> CONFIG_IP_NF_MATCH_MAC=y
> CONFIG_IP_NF_MATCH_PKTTYPE=y
> CONFIG_IP_NF_MATCH_MARK=y
> CONFIG_IP_NF_MATCH_MULTIPORT=y
> CONFIG_IP_NF_MATCH_TOS=y
> CONFIG_IP_NF_MATCH_RECENT=y
> CONFIG_IP_NF_MATCH_ECN=y
> CONFIG_IP_NF_MATCH_DSCP=y
> CONFIG_IP_NF_MATCH_AH_ESP=y
> CONFIG_IP_NF_MATCH_LENGTH=y
> CONFIG_IP_NF_MATCH_TTL=y
> CONFIG_IP_NF_MATCH_TCPMSS=y
> CONFIG_IP_NF_MATCH_HELPER=y
> CONFIG_IP_NF_MATCH_STATE=y
> CONFIG_IP_NF_MATCH_CONNTRACK=y
> CONFIG_IP_NF_MATCH_OWNER=y
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_NAT=y
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_IP_NF_TARGET_REDIRECT=y
> CONFIG_IP_NF_TARGET_NETMAP=y
> CONFIG_IP_NF_TARGET_SAME=y
> CONFIG_IP_NF_MANGLE=y
> CONFIG_IP_NF_TARGET_TOS=y
> CONFIG_IP_NF_TARGET_ECN=y
> CONFIG_IP_NF_TARGET_DSCP=y
> CONFIG_IP_NF_TARGET_MARK=y
> CONFIG_IP_NF_TARGET_CLASSIFY=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_IP_NF_TARGET_TCPMSS=y
> CONFIG_IP_NF_ARPTABLES=y
> CONFIG_IP_NF_ARPFILTER=y
> CONFIG_IP_NF_ARP_MANGLE=y
> CONFIG_IP_NF_TARGET_NOTRACK=m
> CONFIG_IP_NF_RAW=m
> CONFIG_NETDEVICES=y
> CONFIG_DUMMY=y
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> CONFIG_NET_PCI=y
> CONFIG_VIA_RHINE=y
> CONFIG_VIA_RHINE_MMIO=y
> CONFIG_S2IO=m
> CONFIG_NET_RADIO=y
> CONFIG_NET_WIRELESS=y
> CONFIG_INPUT=y
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
> CONFIG_SOUND_GAMEPORT=y
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_NR_TTY_DEVICES=63
> CONFIG_HW_CONSOLE=y
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_CORE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> CONFIG_LIRC_SUPPORT=y
> CONFIG_LIRC_MAX_DEV=2
> CONFIG_LIRC_BT829=y
> CONFIG_LIRC_IT87=y
> CONFIG_HW_RANDOM=y
> CONFIG_I2C=y
> CONFIG_I2C_CHARDEV=y
> CONFIG_I2C_ALGOBIT=y
> CONFIG_I2C_ALGOPCF=y
> CONFIG_I2C_VIAPRO=y
> CONFIG_VIDEO_DEV=y
> CONFIG_DVB=y
> CONFIG_DVB_CORE=y
> CONFIG_DVB_STV0299=y
> CONFIG_DVB_AV7110=y
> CONFIG_DVB_AV7110_FIRMWARE=y
> CONFIG_DVB_AV7110_FIRMWARE_FILE="/usr/lib/hotplug/firmware/dvb-ttpci
> -01.fw"
> CONFIG_DVB_AV7110_OSD=y
> CONFIG_VIDEO_SAA7146=y
> CONFIG_VIDEO_SAA7146_VV=y
> CONFIG_VIDEO_VIDEOBUF=y
> CONFIG_VIDEO_BUF=y
> CONFIG_FB=y
> CONFIG_VGA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_SPEAKUP_DEFAULT="none"
> CONFIG_SOUND=y
> CONFIG_SND=y
> CONFIG_SND_TIMER=y
> CONFIG_SND_PCM=y
> CONFIG_SND_RAWMIDI=y
> CONFIG_SND_MPU401_UART=y
> CONFIG_SND_AC97_CODEC=y
> CONFIG_SND_VIA82XX=y
> CONFIG_USB=y
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_EHCI_HCD=y
> CONFIG_USB_UHCI_HCD=y
> CONFIG_USB_STORAGE=y
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> CONFIG_JBD=y
> CONFIG_FS_MBCACHE=y
> CONFIG_REISER4_FS=y
> CONFIG_REISER4_LARGE_KEY=y
> CONFIG_REISER4_USE_EFLUSH=y
> CONFIG_FS_POSIX_ACL=y
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_UDF_FS=y
> CONFIG_FAT_FS=y
> CONFIG_NTFS_FS=y
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> CONFIG_DEVFS_FS=y
> CONFIG_DEVFS_MOUNT=y
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_ISO8859_1=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_DEBUG_SPINLOCK_SLEEP=y
> CONFIG_4KSTACKS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
> CONFIG_CRC32=y
> CONFIG_LIBCRC32C=m
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_PC=y
>
> dmesg:
> Linux version 2.6.7-rc3-love2 (root at nebuchadnezzar) (gcc version 3.3.2
> 20031218 (Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #1 Tue Jun 29
> 09:44:42 EDT 2004
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 511MB LOWMEM available.
> found SMP MP-table at 000f5480
> On node 0 totalpages: 131056
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 126960 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.2 present.
> ACPI: RSDP (v000 KM400A ) @
> 0x000f6f30
> ACPI: RSDT (v001 KM400A AWRDACPI 0x42302e31 AWRD 0x00000000) @
> 0x1fff3000
> ACPI: FADT (v001 KM400A AWRDACPI 0x42302e31 AWRD 0x00000000) @
> 0x1fff3040
> ACPI: MADT (v001 KM400A AWRDACPI 0x42302e31 AWRD 0x00000000) @
> 0x1fff7240
> ACPI: DSDT (v001 KM400A AWRDACPI 0x00001000 MSFT 0x0100000e) @
> 0x00000000
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 6:10 APIC version 16
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: Assigned apic_id 2
> IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Built 1 zonelists
> Initializing CPU#0
> Kernel command line: root=/dev/hda3
> CPU 0 irqstacks, hard=c0512000 soft=c0511000
> PID hash table entries: 2048 (order 11: 16384 bytes)
> Detected 1825.992 MHz processor.
> Using tsc for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 514160k/524224k available (2675k kernel code, 9300k reserved,
> 1086k data, 388k init, 0k highmem, 0k BadRAM)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay loop... 3579.90 BogoMIPS
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000
> 00000000
> CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000
> 00000000
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: AMD Athlon(tm) XP 2500+ stepping 00
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> ENABLING IO-APIC IRQs
> init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22,
> 2-23 not connected.
> ..TIMER: vector=0x31 pin1=2 pin2=-1
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 1825.0639 MHz.
> ..... host bus clock speed is 331.0934 MHz.
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfb9e0, last bus=1
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20040326
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
> ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
> ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
> ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
> ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
> ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
> ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
> ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
> ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
> ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
> ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
> ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
> ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
> ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 20
> ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
> ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
> ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
> ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
> ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
> ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> number of MP IRQ sources: 15.
> number of IO-APIC #2 registers: 24.
> testing the IO APIC.......................
> IO APIC #2......
> .... register #00: 02000000
> ....... : physical APIC id: 02
> ....... : Delivery Type: 0
> ....... : LTS : 0
> .... register #01: 00178003
> ....... : max redirection entries: 0017
> ....... : PRQ implemented: 1
> ....... : IO APIC version: 0003
> .... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
> 00 000 00 1 0 0 0 0 0 0 00
> 01 001 01 0 0 0 0 0 1 1 39
> 02 001 01 0 0 0 0 0 1 1 31
> 03 001 01 0 0 0 0 0 1 1 41
> 04 001 01 0 0 0 0 0 1 1 49
> 05 001 01 0 0 0 0 0 1 1 51
> 06 001 01 0 0 0 0 0 1 1 59
> 07 001 01 0 0 0 0 0 1 1 61
> 08 001 01 0 0 0 0 0 1 1 69
> 09 001 01 0 1 0 1 0 1 1 71
> 0a 001 01 0 0 0 0 0 1 1 79
> 0b 001 01 0 0 0 0 0 1 1 81
> 0c 001 01 0 0 0 0 0 1 1 89
> 0d 001 01 0 0 0 0 0 1 1 91
> 0e 001 01 0 0 0 0 0 1 1 99
> 0f 001 01 0 0 0 0 0 1 1 A1
> 10 001 01 1 1 0 1 0 1 1 A9
> 11 001 01 1 1 0 1 0 1 1 B1
> 12 000 00 1 0 0 0 0 0 0 00
> 13 000 00 1 0 0 0 0 0 0 00
> 14 001 01 1 1 0 1 0 1 1 C1
> 15 001 01 1 1 0 1 0 1 1 B9
> 16 001 01 1 1 0 1 0 1 1 C9
> 17 001 01 1 1 0 1 0 1 1 D1
> IRQ to pin mappings:
> IRQ0 -> 0:2
> IRQ1 -> 0:1
> IRQ3 -> 0:3
> IRQ4 -> 0:4
> IRQ5 -> 0:5
> IRQ6 -> 0:6
> IRQ7 -> 0:7
> IRQ8 -> 0:8
> IRQ9 -> 0:9
> IRQ10 -> 0:10
> IRQ11 -> 0:11
> IRQ12 -> 0:12
> IRQ13 -> 0:13
> IRQ14 -> 0:14
> IRQ15 -> 0:15
> IRQ16 -> 0:16
> IRQ17 -> 0:17
> IRQ20 -> 0:20
> IRQ21 -> 0:21
> IRQ22 -> 0:22
> IRQ23 -> 0:23
> .................................... done.
> Machine check exception polling timer started.
> devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
> devfs: boot_options: 0x1
> NTFS driver 2.1.14 [Flags: R/O].
> udf: registering filesystem
> PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
> PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> ACPI: Fan [FAN] (on)
> ACPI: Processor [CPU0] (supports C1 C2)
> ACPI: Thermal Zone [THRM] (33 C)
> mice: PS/2 mouse device common for all mice
> serio: i8042 AUX port at 0x60,0x64 irq 12
> input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: AT Translated Set 2 keyboard on isa0060/serio0
> lirc_dev: IR Remote Control driver registered, at major 61
> ATIR: pci_prob failed
> lirc_dev: lirc_register_plugin:sample_rate: 0
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
> disabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Using anticipatory io scheduler
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
> ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
> eth0: VIA Rhine II at 0xe6012000, 00:0e:a6:b1:7a:72, IRQ 23.
> eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link
> 0000.
> Linux video capture interface: v1.00
> saa7146: register extension 'dvb'.
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
> saa7146: found saa7146 @ mem e080a000 (revision 1, irq 17)
> (0x13c2,0x0003).
> DVB: registering new adapter (Technotrend/Hauppauge PCI rev2.1).
> probe_tuner: try to attach to Technotrend/Hauppauge PCI rev2.1
> drivers/media/dvb/frontends/stv0299.c: setup for tuner BSRU6, TDQB-S00x
> DVB: registering frontend 0:0 (STV0299/TSA5059/SL1935 based)...
> Technotrend/Hauppauge PCI rev2.1 adapter 0 has MAC addr =
> 00:d0:5c:23:6d:3a
> gpioirq unknown type=0 len=0
> DVB: AV7110(0) - firm f0240009, rtsl b0250018, vid 71010068, app
> 8000261c
> DVB: AV7110(0) - firmware supports CI link layer interface
> av7110(0): Crystal audio DAC detected
> videodev: "av7110" has no release callback. Please fix your driver for
> proper sysfs support, see http://lwn.net/Articles/36850/
> saa7146_vv: saa7146 (0): registered device video0 [v4l2]
> av7110: found av7110-0.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> hda: WDC WD800JB-00FMA0, ATA DISK drive
> hdc: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63
> hda: cache flushes supported
> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
> hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21
> ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
> ehci_hcd 0000:00:10.3: irq 21, pci mem e08b8000
> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 6 ports detected
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller
> uhci_hcd 0000:00:10.0: irq 21, io base 0000d000
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (#2)
> uhci_hcd 0000:00:10.1: irq 21, io base 0000d400
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (#3)
> uhci_hcd 0000:00:10.2: irq 21, io base 0000d800
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> i2c /dev entries driver
> Advanced Linux Sound Architecture Driver Version 1.0.5 (Sun May 30
> 10:49:40 2004 UTC).
> ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> codec_read: codec 0 is not valid [0xfe0000]
> codec_read: codec 0 is not valid [0xfe0000]
> codec_read: codec 0 is not valid [0xfe0000]
> codec_read: codec 0 is not valid [0xfe0000]
> ALSA device list:
> #0: VIA 8235 at 0xe000, irq 22
> NET: Registered protocol family 2
> IP: routing cache hash table of 4096 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 65536)
> ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per
> conntrack
> ip_tables: (C) 2000-2002 Netfilter core team
> ipt_recent v0.3.1: Stephen Frost <sfrost at snowman.net>.
> http://snowman.net/projects/ipt_recent/
> arp_tables: (C) 2002 David S. Miller
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> VFS: Mounted root (ext3 filesystem) readonly.
> Mounted devfs on /dev
> Freeing unused kernel memory: 388k freed
> Adding 1959920k swap on /dev/hda2. Priority:-1 extents:1
> EXT3 FS on hda3, internal journal
> ath_hal: module license 'Proprietary' taints kernel.
> ath_hal: 0.9.9.12
> wlan: 0.7.3.2 BETA
> ath_pci: 0.8.6.1 BETA
> ath_pci: 0.8.6.1 BETA
> ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16
> Setup queue (0) for WME_AC_BK
> Setup queue (1) for WME_AC_BE
> Setup queue (2) for WME_AC_VI
> Setup queue (3) for WME_AC_VO
> ath0: mac 5.6 phy 4.1 5ghz radio 4.6
> ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> ath0: 802.11 address: 00:0f:3d:03:fb:26
> ath0: Atheros 5212: mem=0xe6000000, irq=16
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
More information about the mythtv-users
mailing list