[mythtv-users] Re: Homebrew PVR Multi-Circuit

Colin Smillie csmillie at gmail.com
Mon Jun 21 20:41:29 EDT 2004

I really like this idea.  

One solution to simplify the driver development might be to have the
microcontroller read the actual LIRC/IR signals and use special signal
triggers.  You could use setup signals that would trigger the
controller to turn on the record LED, or even transmit ASCII chars for
the LCD.  In this way you could just use the standard LIRC drivers.

There might be some IR based keyboards ( assuming LIRC can understand
them ) that you could use for your signal/trigger protocol.

It think it would be best to use a USB connector though, preferrably
with both internal motherboard header and external connector.  I can
see both Serial and Parallel being dropped from motherboards.

I've seen USB to Serial connectors which might work, if the circuitry
for USB is too complicated.  This might be put some burden on the
driver development though, not sure how they work.

On Mon, 21 Jun 2004 15:05:27 -0400, Steven White
<stevew at s2microsolutions.com> wrote:
> Ideally, what I would like to do is make something compatible with the
> UIRT2 protocol and add in the functionality of writing to the LCD and
> toggling the status LEDs.  This would allow for everything to be on one
> com port.  I'm an embedded microcontroller type programmer, not a Linux
> programmer, so I'm not sure that this is possible on the PC side.  Would
> it be possible to write a driver for LIRC that supports these extra
> commands (I'll ask some people in the LIRC project too)?  I would only
> need some messages transmitted on the serial port in plain text for this
> to work.  The microcontroller can make the decisions as to whether the
> data is IR, LED, or LCD related.  I'm trying to make the circuit take up
> as little hardware resources as possible.  I guess I could use the
> parallel port for IR I/O and then use a serial port for the LCD and LEDs
> as an alternative approach.  Does anyone have any other ideas or comments?
> Steve
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

More information about the mythtv-users mailing list