[mythtv-users] Capture card, am I missing something?
Ed Benckert
ed at ebonmists.com
Sun Jun 20 21:52:38 EDT 2004
I'm trying to set up a capture card in a second backend I'm working on as an
experiment, and it's a Hauppauge WinTV Go card. Bt878 chipset. Cant get the
stinking thing to work no matter what I do... here's the output from my
/var/log/messages, does it look familiar to anyone? Only thing I can think
of is some kinda IRQ comflict, but I dont have any empty PCI slots to move
the card to. The last errors occur when I try and run tvtime to view the
output of /dev/video0 since myth cant see it either, figured I'd see what it
looked like/if it was working at all.
Jun 20 18:06:41 ebonmists kernel: bttv: driver version 0.9.15 loaded
Jun 20 18:06:41 ebonmists kernel: bttv: using 8 buffers with 2080k (520
pages) each for capture
Jun 20 18:06:41 ebonmists kernel: bttv: Host bridge needs ETBF enabled.
Jun 20 18:06:41 ebonmists kernel: bttv: Bt8xx card found (0).
Jun 20 18:06:41 ebonmists kernel: PCI: Found IRQ 11 for device 00:09.0
Jun 20 18:06:41 ebonmists kernel: PCI: Sharing IRQ 11 with 00:09.1
Jun 20 18:06:41 ebonmists kernel: PCI: Sharing IRQ 11 with 00:0f.0
Jun 20 18:06:41 ebonmists kernel: bttv0: Bt878 (rev 17) at 00:09.0, irq: 11,
latency: 32, mmio: 0xd9100000
Jun 20 18:06:41 ebonmists kernel: bttv0: detected: Hauppauge WinTV
[card=10], PCI subsystem ID is 0070:13eb
Jun 20 18:06:41 ebonmists kernel: bttv0: using: Hauppauge (bt878)
[card=10,autodetected]
Jun 20 18:06:41 ebonmists kernel: bttv0: enabling ETBF (430FX/VP3 compatibilty)
Jun 20 18:06:41 ebonmists kernel: bttv0: Hauppauge/Voodoo msp34xx: reset
line init [5]
Jun 20 18:06:41 ebonmists kernel: bttv0: Hauppauge eeprom: model=44801,
tuner=Temic 4036FY5 (8), radio=no
Jun 20 18:06:41 ebonmists kernel: bttv0: using tuner=8
Jun 20 18:06:41 ebonmists kernel: bttv0: i2c: checking for MSP34xx @ 0x80...
not found
Jun 20 18:06:41 ebonmists kernel: bttv0: i2c: checking for TDA9875 @ 0xb0...
not found
Jun 20 18:06:41 ebonmists kernel: bttv0: i2c: checking for TDA7432 @ 0x8a...
not found
Jun 20 18:06:41 ebonmists kernel: tuner: chip found at addr 0xc2 i2c-bus
bt878 #0 [sw]
Jun 20 18:06:41 ebonmists kernel: tuner: type set to 8 (Temic NTSC (4036
FY5)) by bt878 #0 [sw]
Jun 20 18:06:41 ebonmists kernel: bttv0: registered device video0
Jun 20 18:06:41 ebonmists kernel: bttv0: registered device vbi0
Jun 20 18:06:41 ebonmists kernel: bttv0: PLL: 28636363 => 35468950 .. ok
Jun 20 18:06:46 ebonmists kernel: bttv0: PLL can sleep, using XTAL (28636363).
Jun 20 18:06:46 ebonmists kernel: bttv0: SCERR @ 0951f000,bits: HSYNC FBUS
SCERR*
Jun 20 18:06:46 ebonmists last message repeated 3 times
Jun 20 18:06:46 ebonmists kernel: bttv0: timeout: drop=0 irq=40/40,
risc=0951f000, bits: HSYNC FBUS
Jun 20 18:06:46 ebonmists kernel: bttv0: reset, reinitialize
Jun 20 18:06:46 ebonmists kernel: bttv0: PLL can sleep, using XTAL (28636363).
Jun 20 18:06:46 ebonmists kernel: bttv0: SCERR @ 0951f000,bits: VSYNC HSYNC
FBUS SCERR*
More information about the mythtv-users
mailing list