[mythtv-users] Cannot tune PVR 350 on FC3

Juan C. Gallardo jgamo at cantv.net
Fri Dec 10 09:43:41 UTC 2004


Hello

Maybe it doesn't help much, but the new version of the ivtv driver 
solves problems with some tuners, but from your post I can see that your 
card is not the one with that kind of problems.
Your tuner us type 2 and that one should be reconized by any ivtv driver 
version.
What I can advise you is to post all the information related with ivtv 
(module options, your region, etc) so everyone can have a look at it and 
try to help you.

Juan

Bruce McKenzie wrote:

> Greetings -
>
> I'm starting here, but can be persuaded to move off to the ivtv-devel 
> list if there is no solution known (here)....
>
> I've installed myth 0.16 (wow!) on FC3 with Jared's guide (wow!). I've 
> got TVout working, IR working, life is good...
>
> Except for the ubiquitous "always get static from tuner0" even with 
> ptune and mplayer.
>
> I've tried all the module options, and I get nuttin'. I just saw the 
> tuning frequency stuff, so I'll try that tonight.
>
> I'm running ivtv 0.1.10 (0.1.10-48.4_pre2_ck100zz.rhfc3.at).
>
> QUESTION: Should I upgrade to 0.2.0 ? Has that solved anyone's issue 
> with tuning problems?
>
> FOLLOWUP QUESTIONs:  If so, how do I tell apt to get that version?
> .... How can I revert to 0.1.10 should I wish to?
>
>
> TIA,
>
> Bruce
>
>
>
> Iv messages:
> Dec  7 23:50:15 localhost kernel: ivtv: version 0.1.10 
> (0.1.10-48.4_pre2_ck100zz.rhfc3.at) loading
> Dec  7 23:50:15 localhost kernel: ivtv: Linux version: 2.6.9-1.681_FC3 
> 686 REGPARM 4KSTACKS gcc-3.4
> Dec  7 23:50:15 localhost kernel: ivtv: In case of problems please 
> include the debug info
> Dec  7 23:50:15 localhost kernel: ivtv: between the START INIT IVTV 
> and END INIT IVTV lines when
> Dec  7 23:50:15 localhost kernel: ivtv: mailing the ivtv-devel 
> mailinglist.
> Dec  7 23:50:15 localhost kernel: ivtv: Autodetected WinTV PVR 350 card
> Dec  7 23:50:15 localhost kernel: ivtv: Found an iTVC15 based chip
> Dec  7 23:50:15 localhost kernel: ACPI: PCI interrupt 0000:00:08.0[A] 
> -> GSI 11(level, low) -> IRQ 11
> Dec  7 23:50:15 localhost kernel: ivtv: Unreasonably low latency 
> timer, settingto 64 (was 32)
> Dec  7 23:50:15 localhost kernel: ivtv: pci: VIA detected device: 
> 0x3148 vendor: 0x1106
> Dec  7 23:50:15 localhost kernel: tveeprom: Ignoring new-style 
> parameters in presence of obsolete ones
> Dec  7 23:50:15 localhost kernel: tveeprom: Hauppauge: model = 48132, 
> rev = I123, serial# = 2867373
> Dec  7 23:50:15 localhost kernel: tveeprom: tuner = Philips FM1236 
> (idx = 23, type = 2)
> Dec  7 23:50:15 localhost kernel: tveeprom: tuner fmt = NTSC(M) 
> (eeprom = 0x08,v4l2 = 0x00001000)
> Dec  7 23:50:15 localhost kernel: tveeprom: audio_processor = MSP3440 
> (type = 11)
> Dec  7 23:50:15 localhost kernel: ivtv: i2c attach 
> [client=tveeprom[0],ok]
> Dec  7 23:50:15 localhost kernel: ivtv: Tuner Type 2, Tuner formats 
> 0x00001000,Radio: yes, Model 0x00a51493, Revision 0x00000001
> Dec  7 23:50:15 localhost kernel: ivtv: NTSC tuner detected
> Dec  7 23:50:15 localhost kernel: ivtv: Radio detected
> Dec  7 23:50:15 localhost kernel: tuner: Ignoring new-style parameters 
> in presence of obsolete ones
> Dec  7 23:50:15 localhost kernel: tuner: chip found at addr 0xc2 
> i2c-bus ivtv i2c driver #0
> Dec  7 23:50:15 localhost kernel: ivtv: i2c attach [client=(tuner 
> unset),ok]
> Dec  7 23:50:15 localhost kernel: saa7115: Ignoring new-style 
> parameters in presence of obsolete ones
> Dec  7 23:50:15 localhost kernel: saa7115: starting probe for adapter 
> ivtv i2c driver #0 (0x10005)
> Dec  7 23:50:15 localhost kernel: saa7115: detecting saa7115 client on 
> address 0x42
> Dec  7 23:50:15 localhost kernel: saa7115: writing init values
> Dec  7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok]
> Dec  7 23:50:15 localhost kernel: saa7115: status: (1E) 0x48, (1F) 0xc0
> Dec  7 23:50:15 localhost kernel: saa7127: Ignoring new-style 
> parameters in presence of obsolete ones
> Dec  7 23:50:15 localhost kernel: saa7127: video encoder driver 
> version V 0.3 loaded
> Dec  7 23:50:15 localhost kernel: saa7127: Selecting NTSC video Standard
> Dec  7 23:50:15 localhost kernel: saa7127: Selecting S-Video+Composite
> Dec  7 23:50:15 localhost kernel: saa7127: Turn WSS off
> Dec  7 23:50:15 localhost kernel: saa7127: Widescreen Mode 4:3 Full 
> Format
> Dec  7 23:50:15 localhost kernel: saa7127: Selecting Normal Encoder Input
> Dec  7 23:50:15 localhost kernel: saa7127: Enable Video Output
> Dec  7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7127[0],ok]
> Dec  7 23:50:15 localhost kernel: msp3400: Ignoring new-style 
> parameters in presence of obsolete ones
> Dec  7 23:50:16 localhost kernel: msp34xx: init: chip=MSP3448W-A2 
> +nicam +simple +simpler +radio mode=simpler
> Dec  7 23:50:16 localhost kernel: ivtv: i2c attach 
> [client=MSP3448W-A2,ok]
> Dec  7 23:50:17 localhost kernel: ivtv: Encoder revision: 0x02040024
> Dec  7 23:50:17 localhost kernel: ivtv: Decoder revision: 0x02020023
> Dec  7 23:50:17 localhost kernel: ivtv: Configuring WinTV PVR 350 card 
> with 9 streams
> Dec  7 23:50:17 localhost kernel: ivtv: Create DMA stream 0 using 128 
> buffers of size 32768
> Dec  7 23:50:17 localhost kernel: ivtv: Create DMA stream 1 using 128 
> buffers of size 32768
> Dec  7 23:50:17 localhost kernel: ivtv: Create stream 2 using 128 
> buffers of size 52224
> Dec  7 23:50:17 localhost kernel: ivtv: Create DMA stream 3 using 128 
> buffers of size 32768
> Dec  7 23:50:17 localhost kernel: ivtv: Create stream 4
> Dec  7 23:50:17 localhost kernel: ivtv: Create DMA stream 5 using 16 
> buffers ofsize 32768
> Dec  7 23:50:17 localhost kernel: ivtv: Create stream 6 using 128 
> buffers of size 4096
> Dec  7 23:50:17 localhost kernel: ivtv: Create stream 7
> Dec  7 23:50:17 localhost kernel: ivtv: Create DMA stream 8 using 16 
> buffers ofsize 32768
> Dec  7 23:50:17 localhost kernel: ivtv: Setting Tuner 2
> Dec  7 23:50:17 localhost kernel: tuner: type set to 2 (Philips NTSC 
> (FI1236,FM1236 and compatibles)) by ivtv i2c driver #0
> Dec  7 23:50:17 localhost kernel: ivtv: Setting audio matrix to input 
> 3, output1
> Dec  7 23:50:17 localhost kernel: ivtv: Switching standard to NTSC.
> Dec  7 23:50:17 localhost kernel: saa7115: decoder set norm NTSC
> Dec  7 23:50:17 localhost kernel: saa7115: set audio: 0x01
> Dec  7 23:50:17 localhost kernel: saa7127: Setting Encoder Video Standard
> Dec  7 23:50:17 localhost kernel: saa7127: Set NTSC Video Mode
> Dec  7 23:50:17 localhost kernel: saa7127: Selecting NTSC video Standard
> Dec  7 23:50:17 localhost kernel: ivtv: Initialized WinTV PVR 350, 
> card #0
> Dec  7 23:50:17 localhost kernel: ivtv: ====================  END INIT 
> IVTV  ===
> ---
> Bruce J. McKenzie    |   bruce at doublepup.com    |   DoublePup 
> Enterprises, Inc.
> http://www.doublepup.com    |    Consulting Services for Systems 
> Development
>
>------------------------------------------------------------------------
>
>_______________________________________________
>mythtv-users mailing list
>mythtv-users at mythtv.org
>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
>  
>



More information about the mythtv-users mailing list