[mythtv-users] Re: no output from dvr0 with Hauppauge Nova-T
PCI (tda1004x frontend)
Lee Webb
lee at dot.net.au
Wed Dec 1 05:55:12 UTC 2004
Hi Donovan,
I have got Myth installed and some data in the dvb tables, for instance
here is what I have for TCN 9, do your entries for 9 match these?
mysql> select * from channel c join dvb_channel dc on \
c.chanid = dc.chanid join dvb_pids p on \
p.chanid = dc.chanid \
where c.chanid = 9\G
*************************** 1. row ***************************
chanid: 9
channum: 9
freqid: 9
sourceid: 1
callsign: NINE
name: NINE DIGITAL
icon:
finetune: 0
videofilters:
xmltvid: free.Sydney.9.d1.com.au
recpriority: 0
contrast: 32768
brightness: 32768
colour: 32768
hue: 32768
tvformat: PAL
commfree: 0
visible: 1
outputfilters:
chanid: 9
serviceid: 1
networkid: 0
providerid: 0
transportid: 0
frequency: 191625000
inversion: 0
symbolrate: 69000
fec: 3/4
polarity: V
satid: NULL
modulation: qam_64
bandwidth: 7
lp_code_rate: 1/2
transmission_mode: 8
guard_interval: 1/16
hierarchy: n
pmtcache: NULL
chanid: 9
pid: 519
type: v
lang:
*************************** 2. row ***************************
chanid: 9
channum: 9
freqid: 9
sourceid: 1
callsign: NINE
name: NINE DIGITAL
icon:
finetune: 0
videofilters:
xmltvid: free.Sydney.9.d1.com.au
recpriority: 0
contrast: 32768
brightness: 32768
colour: 32768
hue: 32768
tvformat: PAL
commfree: 0
visible: 1
outputfilters:
chanid: 9
serviceid: 1
networkid: 0
providerid: 0
transportid: 0
frequency: 191625000
inversion: 0
symbolrate: 69000
fec: 3/4
polarity: V
satid: NULL
modulation: qam_64
bandwidth: 7
lp_code_rate: 1/2
transmission_mode: 8
guard_interval: 1/16
hierarchy: n
pmtcache: NULL
chanid: 9
pid: 720
type: a
lang:
2 rows in set (0.00 sec)
Myth even confirms my no data from dvr0 findings:
Starting up as the master server.
2004-12-01 16:45:40 DVB#0 Using DVB card 0, with frontend Philips TDA10045H DVB-T.
2004-12-01 16:45:40 DVB#0 Trying to tune to channel 7.
2004-12-01 16:45:40 DVB#0 Frequency: 177500000. BW:7Mhz HP:2/3 LP:2/3 C:64 TM:8K H:None GI:1/8
2004-12-01 16:45:40 DVB#0 Waiting for frontend event after tune.
2004-12-01 16:45:40 DVB#0 WARNING - Status: NO LOCK!
2004-12-01 16:45:41 DVB#0 WARNING - Status: VITERBI | SYNC | NO LOCK!
2004-12-01 16:45:42 DVB#0 WARNING - Status: CARRIER | VITERBI | SIGNAL | NO LOCK!
2004-12-01 16:45:43 DVB#0 WARNING - Status: NO LOCK!
2004-12-01 16:45:45 DVB#0 Status: CARRIER | VITERBI | SIGNAL | SYNC | LOCK.
2004-12-01 16:45:45 DVB#0 Successfully tuned to channel 7.
2004-12-01 16:45:45 mythbackend version: 0.16.20040906-1 www.mythtv.org
...
2004-12-01 16:46:04 Using profile 'Live TV' to record
2004-12-01 16:46:04 DVB#0 Recorder: Card opened successfully.
2004-12-01 16:46:04 DVB#0 Adding pid 514, type 0
2004-12-01 16:46:04 2 ok
2004-12-01 16:46:04 DVB#0 Adding pid 513, type 1
2004-12-01 16:46:04 1 1
2004-12-01 16:46:04 5 29.97
2004-12-01 16:46:04 240 Seven News[]:[] []:[]The latest news from aroun...
2004-12-01 16:46:05 DVB#0 WARNING - No data from card in 1 second.
2004-12-01 16:46:06 DVB#0 WARNING - No data from card in 1 second.
2004-12-01 16:46:07 DVB#0 WARNING - No data from card in 1 second.
What revision is your card? This one's only about 2 months old so I am
wondering if there is something slightly different with this card.
It does work in windows I have been told, but since I don't do windows I
can't re-confirm this.
I am am beginning to think that I will have to buy another card ... :(
Cheers
Lee
On Wed, 2004-12-01 at 14:20 +1100, Donovan Lashbrooke wrote:
> Lee,
> not sure if this helps or not. but i am running the same card as you
> and get the same results using ./tzap (using as-sydney-north-shore
> from east sydney).
>
> I also get no result when doing a cat on /dvr0. but......this doesn't
> affect mythtv from displaying live SD TV and recording on my system.
>
> have you tried to install mythtv and input channel frequency's, pid's,
> etc and see if you get any joy?
>
> myth can be a bitch to setup, but once it's going, it's great.
>
> regards,
>
> donovan.
>
>
> On Wed, 01 Dec 2004 12:20:03 +1100, Lee Webb <lee at dot.net.au> wrote:
> > Hi Glen,
> >
> > I actually posted this query on the linux-dvb mailing list, but have had
> > little joy there thus far.
> >
> > I am going to give the 216 windows dll a go to see if it makes any
> > difference, so close but yet so far away from making it work.
> >
> > Cheers
> >
> > --
> > Lee Webb
> >
> >
> >
> > On Mon, 2004-11-29 at 17:43 +1100, Glen Tregoning wrote:
> > > Hello Lee,
> > >
> > > This might be more of a linux-tv.org mailing list question but...
> > >
> > > I've had success using the dvb-apps from the CVS archive,
> > > The scanning util is know known as dvbscan i believe.
> > > Also check your firmware is correct?
> > > I'm using the one from the windows zip file.
> > > I found this page exceedingly useful at getting mine working
> > > http://www.dtvforum.info/index.php?s=1998bca628fee49c695e0048cb0d7efd&showtopic=2397&hl=linux&st=20
> > >
> > > Best of luck
> > >
> > > Glen
> > > _______________________________________________
> > > mythtv-users mailing list
> > > mythtv-users at mythtv.org
> > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> > _______________________________________________
> > mythtv-users mailing list
> > mythtv-users at mythtv.org
> > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> >
> >
> >
>
More information about the mythtv-users
mailing list