[mythtv-users] Setting correct tuner type?

[Jo Pettitt]

I've got the SVHS input working now so I can see and record an input. My 
tuner is still giving me grief. The picture is consistently snow.

Channels are tuned in to:

BBC1               26
BBC2               33
ITV                   23
Channel 4         30
Five                  37

I have the following modules.conf and after a modprobe tveeprom I get 
the following dmesg information. From what I can figure out I have a 
tuner type 1 which I have set. If that is the case then why the snow?

/etc/modules.d/ivtv

alias char-major-81 videodev
alias char-major-81-0 ivtv
#alias char-major-61 lirc_i2c
options ivtv ivtv-debug=1 mpg_buffers=90
options tuner type=1
options msp3400 once=1 simple=1 debug=0
add below ivtv msp3400 saa7115 tuner
#add above ivtv lirc_dev lirc_i2c

modprobe tveeprom
dmesg

ivtv: version 0.1.10 (0.1.10pre2-ck100z_pages) loading
ivtv: Linux version: 2.6.7-rc3-mm2 SMP preempt PENTIUM4 REGPARM gcc-3.3
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: pci: PCIBUS detected device: 0x2530 vendor: 0x8086
msp34xx: ivtv version
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, 
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Aug  5 2004 20:23:56
ivtv: i2c attach [client=MSP3418W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x48, (1F) 0xc0
tveeprom: Hauppauge: model = 48135, rev = J324, serial# = 7015279
tveeprom: tuner = Philips FM1246 (idx = 24, type = 1)
tveeprom: tuner fmt = PAL(I) (eeprom = 0x10, v4l2 = 0x00000010)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 1, Tuner formats 0x00000010, Radio: yes, Model 
0x00a93494, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: Radio detected
saa7127: video encoder driver version V 0.3 loaded
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 1024 buffers of size 4096
ivtv: Create DMA stream 1 using 1024 buffers of size 4096
ivtv: Create stream 2 using 128 buffers of size 4096
ivtv: Create DMA stream 3 using 128 buffers of size 4096
ivtv: Create stream 4
ivtv: Create DMA stream 5 using 128 buffers of size 4096
ivtv: Create stream 6 using 128 buffers of size 4096
ivtv: Create stream 7
ivtv: Create DMA stream 8 using 128 buffers of size 4096
ivtv: Setting Tuner 1
ivtv: i2c client addr: 0x61 not found!
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
ivtv: i2c client addr: 0x61 not found!
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350, card #0