[mythtv-users] Problems with installing APT using Jarod's guide for building a MytTV Box

[Aleaxander]

Chaloupka, Karel wrote:

> 
> 
> I installed and update apt using the apt-get update && 
> apt-get-dis-upgrade as specified in Jarod's guide. It took a long time 
> as mentioned. I believe over 150 modules were downloaded. The problem 
> that I'm having is that when it updated the LM_SENSORS module something 
> got screwed up. When I reboot I get a couple of tasks FAILURES. Here 
> they are:
> 
> Starting lm_sensors: Starting up sensors: Can't access /proc file 
> /proc/sys/dev/sensors/chips or /proc/bas/i2c unreadable;
> 
> Make sure you have done `modprobe i2c-proc1` !
> 
> How can I fix this? I repeated this twice from scratch and get the same 
> problem each time. When you do the apt-get-dis-upgrade you can't tell it 
> not to install lm_sensors. Any suggestions? I believe this problem is 
> causing my lirc task not to work.
> 
> Thanks
> 

 From Jarod's guide:

"Also, while there is no harm in simply leaving it be, you might want to 
do something with lm_sensors, to eliminate "Failed!" warnings at 
startup. The lm_sensors init script was enabled at some point during all 
the updates, but isn't necessary for a functional MythTV box. There are 
two routes to take here. First, you can go and actually configure 
lm_sensors for your motherboard and sensor chipset, providing you with 
some monitoring of your system's temperatures, fan speeds, voltages, 
etc. Second, you can simply issue the command (as root) "/sbin/chkconfig 
lm_sensors off"."

So the easiest fix is just run:

# /sbin/chkconfig lm_sensors off

-Aleaxander