[mythtv-users] Stuck at base 1
Malcolm Wotton
malcolmwotton at yahoo.co.uk
Thu Mar 13 08:47:50 UTC 2003
This email mostly for Ray Olszewski, but anyone else can chip in!
Thanks for the pointers here's the answers to the questions . . .
1-4 listed at the end of the email. I can't tell if they are all ok, but
something that looks wrong for certain is a line in dmesg that says
i2c-algo-bit.o: bt848 #0 i2c_write: error - bailout.
I don't know what I need to do to fix this if it's the problem (reinstall
i2c? - where's the soure?)
5 I might have confused the issue by saying cable, I actually meant
terrestrial aerial, however it uses PAL, europe-west
6 The hauppage card works with the supplied WinTV2000 software on windows
xp. I've not tried it with anything else.
Finally, I seem to remember that I had to change my PCI latency on my
windows box to get the card working before. There's a reference to this on
the Hauppage website. I'd try this on my linux machine but it doesn't seem
to have an option to set the latency (Gigabyte GA-7VAX). If this is the
problem then any ideas to get round this would be very useful!
Thanks again for the help.
Malcolm
-----------TECHNICAL OUTPUT FOLLOWS------------
DETAILS OF /PROC/PCI
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: PCI device 1106:3189 (VIA Technologies, Inc.) (rev 0).
Master Capable. Latency=8.
Prefetchable 32 bit memory at 0xd0000000 [0xd7ffffff].
Bus 0, device 1, function 0:
PCI bridge: PCI device 1106:b168 (VIA Technologies, Inc.) (rev 0).
Master Capable. No bursts. Min Gnt=12.
Bus 0, device 12, function 0:
Multimedia video controller: Brooktree Corporation Bt848 TV with DMA
push (rev 18).
IRQ 16.
Master Capable. Latency=32. Min Gnt=16.Max Lat=40.
Prefetchable 32 bit memory at 0xea000000 [0xea000fff].
Bus 0, device 16, function 0:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 128).
IRQ 21.
Master Capable. Latency=32.
I/O at 0xd000 [0xd01f].
Bus 0, device 16, function 1:
USB Controller: VIA Technologies, Inc. UHCI USB (#2) (rev 128).
IRQ 21.
Master Capable. Latency=32.
I/O at 0xd400 [0xd41f].
Bus 0, device 16, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (#3) (rev 128).
IRQ 21.
Master Capable. Latency=32.
I/O at 0xd800 [0xd81f].
Bus 0, device 16, function 3:
USB Controller: VIA Technologies, Inc. USB 2.0 (rev 130).
IRQ 19.
Master Capable. Latency=32.
Non-prefetchable 32 bit memory at 0xea001000 [0xea0010ff].
Bus 0, device 17, function 0:
ISA bridge: PCI device 1106:3177 (VIA Technologies, Inc.) (rev 0).
Bus 0, device 17, function 1:
IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6).
IRQ 22.
Master Capable. Latency=32.
I/O at 0xdc00 [0xdc0f].
Bus 0, device 17, function 5:
Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97 Audio
Controller (rev 80).
IRQ 22.
I/O at 0xe000 [0xe0ff].
Bus 0, device 19, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C (rev
16).
IRQ 18.
Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
I/O at 0xe400 [0xe4ff].
Non-prefetchable 32 bit memory at 0xea002000 [0xea0020ff].
Bus 1, device 0, function 0:
VGA compatible controller: nVidia Corporation NV1x (rev 163).
IRQ 16.
Master Capable. Latency=248. Min Gnt=5.Max Lat=1.
Non-prefetchable 32 bit memory at 0xe8000000 [0xe8ffffff].
Prefetchable 32 bit memory at 0xd8000000 [0xdfffffff].
Prefetchable 32 bit memory at 0xe0000000 [0xe007ffff].
Note - the TV card and the graphics card seem to be on the same IRQ now.
They weren't before I moved the card.
DETAIL FOR LSMOD
Module Size Used by Tainted: P
sg 31276 0 (autoclean) (unused)
st 26740 0 (autoclean) (unused)
sr_mod 15096 0 (autoclean) (unused)
sd_mod 11788 0 (autoclean) (unused)
scsi_mod 90372 4 (autoclean) [sg st sr_mod sd_mod]
ide-cd 28712 0 (autoclean)
cdrom 26848 0 (autoclean) [sr_mod ide-cd]
floppy 49340 0 (autoclean)
nvidia 1469056 10 (autoclean)
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-oss]
snd-seq 33264 2 [snd-seq-oss snd-seq-midi-event]
snd-seq-device 3836 0 [snd-seq-oss snd-seq]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-via8233 5772 0
snd-ac97-codec 25508 0 [snd-via8233]
snd-pcm 55808 0 [snd-pcm-oss snd-via8233]
snd-timer 9964 0 [snd-seq snd-pcm]
snd 24804 0 [snd-seq-oss snd-seq-midi-event snd-seq
snd-seq-device snd-pcm-oss snd-mixer-oss snd-via8233 snd-ac97-codec snd-pcm
snd-timer]
nfsd 66576 8 (autoclean)
lockd 46480 1 (autoclean) [nfsd]
sunrpc 60188 1 (autoclean) [nfsd lockd]
af_packet 13000 1 (autoclean)
8139too 14472 1 (autoclean)
mii 1152 0 (autoclean) [8139too]
supermount 14340 2 (autoclean)
tuner 9536 1 (autoclean)
tda7432 3644 1 (autoclean)
tda9875 3676 0 (autoclean) (unused)
msp3400 15148 0 (autoclean) (unused)
bttv 66880 0
i2c-algo-bit 7432 1 [bttv]
i2c-core 15332 0 [tuner tda7432 tda9875 msp3400 bttv
i2c-algo-bit]
soundcore 3780 0 [snd bttv]
videodev 5792 2 [bttv]
ehci-hcd 14472 0 (unused)
usb-uhci 21676 0 (unused)
usbcore 58304 1 [ehci-hcd usb-uhci]
rtc 6560 0 (autoclean)
ext3 74004 2
jbd 38452 2 [ext3]
DETAIL FOR /PROC/INTERRUPTS
CPU0
0: 56327 IO-APIC-edge timer
1: 439 IO-APIC-edge keyboard
2: 0 XT-PIC cascade
8: 1 IO-APIC-edge rtc
12: 14187 IO-APIC-edge PS/2 Mouse
14: 9150 IO-APIC-edge ide0
15: 11 IO-APIC-edge ide1
16: 40448 IO-APIC-level bttv, nvidia
18: 2136 IO-APIC-level eth0
19: 0 IO-APIC-level ehci-hcd
21: 0 IO-APIC-level usb-uhci, usb-uhci, usb-uhci
22: 5250 IO-APIC-level VIA8233
NMI: 0
LOC: 56284
ERR: 0
MIS: 0
DETAILS FOR DMESG
Linux version 2.4.19-16mdk (quintela at bi.mandrakesoft.com) (gcc version 3.2
(Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
found SMP MP-table at 000f4bb0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f0000 reserved twice.
hm, page 000f1000 reserved twice.
Advanced speculative caching feature present
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Kernel command line: BOOT_IMAGE=linux ro root=301 quiet devfs=mount
Initializing CPU#0
Detected 1514.961 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 3021.20 BogoMIPS
Memory: 256440k/262080k available (1176k kernel code, 5252k reserved, 444k
data, 136k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2
Advanced speculative caching feature present
Disabling advanced speculative caching
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbf7 c1c3fbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbf7 c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbf7 c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1800+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-20, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 22.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
WARNING: unexpected IO-APIC, please mail
to linux-smp at vger.kernel.org
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 000 00 1 0 0 0 0 0 0 00
12 001 01 1 1 0 1 0 1 1 A1
13 001 01 1 1 0 1 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 B1
16 001 01 1 1 0 1 0 1 1 B9
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1514.9123 MHz.
..... host bus clock speed is 201.9883 MHz.
cpu: 0, clocks: 2019883, slice: 1009941
CPU0<T0:2019872,T1:1009920,D:11,S:1009941,C:2019883>
mtrr: v1.40 (20010327) Richard Gooch (rgooch at atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf9d60, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [1106/3189] at 00:00.0
PCI->APIC IRQ transform: (B0,I12,P0) -> 16
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P2) -> 21
PCI->APIC IRQ transform: (B0,I16,P3) -> 19
PCI->APIC IRQ transform: (B0,I17,P0) -> 22
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B0,I19,P0) -> 18
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: Via IRQ fixup for 00:10.0, from 10 to 5
PCI: Via IRQ fixup for 00:10.1, from 10 to 5
PCI: Via IRQ fixup for 00:10.2, from 11 to 5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v1.12a (20020514) Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd8000000, mapped to 0xd0800000, size 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:ede0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 30412 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM FIREBALLlct15 20, ATA DISK drive
hdc: TOSHIBA CD-ROM XM-6102B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 121k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hcd.c: ehci-hcd @ 00:10.3, VIA Technologies, Inc. USB 2.0
hcd.c: irq 19, pci mem d496c000
usb.c: new USB bus registered, assigned bus number 4
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
hub.c: USB hub found
hub.c: 6 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal
Adding Swap: 248968k swap-space (priority -1)
Linux video capture interface: v1.00
i2c-core.o: i2c core module version 2.6.4 (20020719)
i2c-algo-bit.o: i2c bit algorithm module version 2.6.4 (20020719)
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is PCI device 1106:3189 (VIA Technologies, Inc.)
bttv: Bt8xx card found (0).
bttv0: Bt848 (rev 18) at 00:0c.0, irq: 16, latency: 32, mmio: 0xea000000
bttv0: using: BT848A( *** UNKNOWN/GENERIC **) [card=0,autodetected]
bttv0: using tuner=-1
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... found
i2c-algo-bit.o: bt848 #0 i2c_write: error - bailout.
tda9875: I/O error (read2)
i2c-algo-bit.o: bt848 #0 i2c_write: error - bailout.
tda9875: I/O error (read2)
tda9875: no such chip at 0xb0 (dic=0xffffffff rev=0xffffffff)
bttv0: i2c: checking for TDA7432 @ 0x8a... found
i2c-algo-bit.o: bt848 #0 i2c_write: error - bailout.
tda7432: I/O error, trying tda7432_set
tda7432: init
bttv0: i2c attach [client=TDA7432,ok]
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
bttv0: i2c attach [client=(unset),ok]
bttv0: registered device video0
bttv0: registered device vbi0
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
8139too Fast Ethernet driver 0.9.25
eth0: RealTek RTL8139 Fast Ethernet at 0xd497d000, 00:20:ed:be:96:6d, IRQ 18
eth0: Identified 8139 chip type 'RTL-8139C'
More information about the mythtv-users
mailing list