[mythtv-users] MythTV & ASUS Pundit -- Drivers?

[Kevin Gibbons]

Well, I've tried both lines in my /etc/modules.conf -- so I just switched it
back to "alias eth0 bcm4400" and did a reboot.  But once again, upon boot I
see that GRUB is failing when trying to initialize eth0.

Then while I'm in KDE, if I run the redhat-config-network GUI interface, it
shows eth0 as "inactive"  And when I attempt to activate it, I'm getting:

Determining IP information for eth0.... failed; no link present.  Check
cable?

Now I know it's not the patch cable, as I've used multiple cables and also
verified that these cables DO work.  I have to still be missing some step
along the way.

 KG

----- Original Message -----
From: "Chris Petersen" <lists at forevermore.net>
To: "Discussion about mythtv" <mythtv-users at snowman.net>
Sent: Saturday, June 28, 2003 4:41 PM
Subject: Re: [mythtv-users] MythTV & ASUS Pundit -- Drivers?


> > Well, I'm still pulling my hair out trying to figure out why my lan
> > won't work on the Pundit system.  I located the driver on the ASUS CD,
> > compiled and installed, and modified /etc/modules.conf to contain
> > "alias eth0 bcm4400.o"  --- and also verified that the module WAS
> > copied over to /lib/modules/*kernel_version*/kernel/drivers/net
>
> actually, that should be:
>
> alias eth0 bcm4400
>
> if you're still having audio issues (which redhat 9 autodetected fine
> for me), my modules.conf lists:
>
> alias sound-slot-0 i810_audio
> post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
> >/dev/null 2>&1 || :
> pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
> >/dev/null 2>&1 || :
>
you'll have to deal with those line wraps at >/dev/null...
>
> -Chris
>
> _______________________________________________
> mythtv-users mailing list
> mythtv-users at snowman.net
> http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users