[mythtv-users] trying to watch TV via mythtvfrontend

Ray Olszewski ray at comarre.com
Tue Jul 22 10:11:53 EDT 2003


For the most part, we need to wait until you do the required testing. I did 
want to clarify two small matters.

At 09:17 AM 7/22/2003 +0200, Akos Maroy wrote:
[...]
>>match to the ones in /etc/X11/xawtvrc (or its RH equivalent, if RH keeps 
>>the file in a different location than Debian uses)?
>
>no, I don't know how to import those entries. but when I press on "Watch 
>TV", the tuner card gets tuned to a TV channel (and the audio from that 
>channel is audible, as comes from the tuner card). also, after killink 
>mythfrontend and starting xawtv, it will display that very channel 
>mythfrontend tuned to. Also, I can only kill the audio by starting and 
>then quitting xawtv. to me, it seems that mythtv tunes into some (valid) 
>channel, but failes to display the visual content.

Well ... *nearly" some (valid) channel, anyway. If the frequencies are just 
a bit off, the vidcap card might get passable audio but no interpretable 
video ... like back in the (very) old days of TVs, when you tuned them the 
way you still tune dial radios, before AFT made it easy to hit the exact 
frequency.

Also ... a real wild guess here ... I assume Hungary is a PAL country, but 
might Myth be mis-set to default to NTSC?

>>Bottom line: I infer from the lack of response from others here (more 
>>exactly, the lack of the Myth-specific responses you want) that nobody 
>>recognizes an "obvious" Myth problem from your descriptions. That means
>
>sad to hear. it is strange though that during these three days two other 
>people reported the same problem (no visuals when pressing "Watch TV"). 
>but than again, we might have the same non-MythTv specific issue :)

Or you all may have unrelated issues ... either Myth, non-Myth, or a mix of 
the two. "TV doesn't display properly" is among the most common problems 
encountered by newcomers, and depending on the details, it can be caused by:

1. hardware driver (bttv or ivtv or whatever) problems.

2. hardware setting errors (wrong frequency table, NTSC v. PAL, wrong tuner 
type, etc.).

3. X problems (usually with XV).

4. Audio problems.

5. Permissions problems (that prevent Myth from creating the ringbuffer, 
for example).

And probably a lot of other things. That's why I described your first 
message as "about as vague as they come" or words to that effect. The 
problem description comes up a lot (not just in the last two days, but in 
any week you'd choose to review) not because there is some single, big-deal 
problem with Myth, but because it is the most apparent symptom of many 
*different* underlying problems.
[...]





More information about the mythtv-users mailing list