[mythtv-users] Re:General remote/IR port question *slightly OT*

[Mike Miller]

Here is the deal, I even tried using irrecord to gen my own lircd.conf,
like if I put codex sleep and codeypower and press power, it says sleep
and it says the code for sleep.  I was told this was b/c lirc was not
correctly working, I actually have another idea im going to try.  What
did you mean lirc_gpio is different for each card, I was under the
impression it was the same....

-----Original Message-----
From: mythtv-users-bounces at snowman.net
[mailto:mythtv-users-bounces at snowman.net] On Behalf Of Alexander P.
Petkov
Sent: Sunday, July 13, 2003 8:02 PM
To: mythtv-users at snowman.net
Subject: [mythtv-users] Re:General remote/IR port question *slightly OT*

>Hmmm, could you tell me which lirc you installed?  
lirc-0.6.6 
>Do you think you could also send me your lirc_gpio and lircd.conf?  
Only lircd.conf, as my lirc_gpio is compiled for my card (Avermedia) and
it won't 
work for you: 
============== 
begin remote 
 
  name  Avermedia 
  bits           16 
  flags SPACE_ENC|CONST_LENGTH 
  eps            30 
  aeps          100 
 
  header       8984  4527 
  one           568  1681 
  zero          568   558 
  ptrail        547 
  repeat       8985  2276 
  pre_data_bits   16 
  pre_data       0x2FD 
  gap          108069 
  toggle_bit      0 
 
 
      begin codes 
		some code follow (trimmed) 
      end codes	 
end remote 
 
begin remote 
  name  Aver_extended 
  bits           32 
  eps            30 
  aeps          100 
 
  one             0     0 
  zero            0     0 
  gap          199991 
  toggle_bit      0 
 
 
      begin codes 
          PLAY                     0x0000000002FD1CE3 
          REC                      0x0000000002FD14EB 
          MOVE                     0x0000000002FD7C83 
      end codes 
 
end remote 
============ 
 
Please note the aditional remote section where I defined my own codes.
Then it's 
just a matter of defining the name of the remote in you lircrc fle. Mine
lircd.conf file 
was already predefined (it came with the lirc package), and I just
changed it to my 
needs. 
>I did a make uninstall....thought that would do it.  
That definitely uninstalled it.  
  
Did you try generating a lircd.conf file by using the -f option with
irrecord? That 
might help.  
If you get duplicate responses, you must have hex codes that are the
same. Are 
there hex codes that repeat in your lircd.conf? 
Alex 

_______________________________________________
mythtv-users mailing list
mythtv-users at snowman.net
http://lists.snowman.net/cgi-bin/mailman/listinfo/mythtv-users