[mythtv] Installing a Hauppauge HDPVR-1212 help needed

Michael Drons mdrons at yahoo.com
Mon Jan 19 13:37:15 UTC 2009


I am trying to get my Hauppauge 1212 working.  I am looking at the doc
in the wiki.  It appears to be connected, but I dont get a device. 
Here is what I did.  Connected it to my windows computer and installed
software and fireware ( i think, i am not sure how to check that).  The
software that comes with it sees it as a capture device, so I assumed
it was good.  

I then moved it to my mythbackend, which is a AMD 64 machine, running gentoo, with mythtv svn from yesterday.

output of modprobe hdpvr:

v4l2_compat_ioctl32: exports duplicate symbol v4l_compat_ioctl32 (owned by compat_ioc
tl32)
hdpvr: INFO device_authorization: Status request returned, len 46: 01 0d 4f 63 74 20 
20 31 20 32 30 30 38 20 31 34 3a 34 35 3a 35 30 00 00 00 00 00 00 00 00 00 00 00 00 0
0 a2 9a 79 90 50 54 65 b3 56 53 46
hdpvr: INFO device_authorization: challenge: 90 50 54 65 b3 56 53 46
hdpvr: INFO device_authorization:  response: 7a 08 19 0c 0d 7c 0c c3
hdpvr: INFO device_authorization: magic request returned 8
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_config_call: config call request returned 1
hdpvr: INFO hdpvr_device_init: control request returned 4
hdpvr: INFO get_video_info: get video info returned: 5, 00 00 00 00 00
hdpvr: INFO hdpvr_device_init: no valid video signal or device init failed
hdpvr: INFO hdpvr_device_init: control request returned 1
hdpvr: INFO hdpvr_device_init: control request returned 1
hdpvr: TRACE hdpvr_alloc_buffers: status = 1
hdpvr: INFO hdpvr_alloc_buffers: allocating 16 buffers
hdpvr: USB HD PVR device now attached to /dev/video13
usbcore: registered new interface driver hdpvr

according to the last line it should be /dev/video13, but there is not device there.

ls /dev/video* -la
lrwxrwxrwx 1 root root       6 Jan 17 05:37 /dev/video -> video0
crw-rw---- 1 root video 81,  0 Jan 17 05:37 /dev/video0
crw-rw---- 1 root video 81,  4 Jan 17 05:37 /dev/video1
crw-rw---- 1 root video 81,  9 Jan 17 05:37 /dev/video2
crw-rw---- 1 root video 81,  3 Jan 17 05:37 /dev/video24
crw-rw---- 1 root video 81,  7 Jan 17 05:37 /dev/video25
crw-rw---- 1 root video 81, 12 Jan 17 05:37 /dev/video26
crw-rw---- 1 root video 81, 13 Jan 18 14:13 /dev/video3
crw-rw---- 1 root video 81,  1 Jan 17 05:37 /dev/video32
crw-rw---- 1 root video 81,  5 Jan 17 05:37 /dev/video33
crw-rw---- 1 root video 81, 10 Jan 17 05:37 /dev/video34


video0 is the firewire connection
video1 is pvr250
video2 is pvr500 #1
video3 is pvr500 #2

Any suggestions on were to look or what I can do. I see a device init failed message, but  I am not sure what I need to look at.

Thanks, Mike


      


More information about the mythtv-dev mailing list