[mythtv] DVB-S2 (failure)

[Gareth Glaccum]

I don't know whether this is related (seems a coincidence....)
I upgraded to SVN 21195 this evening.
Immediately I was not able to get a lock on to BBC 1, or BBC HD (or many 
other channels). I had tested these two 20 minutes prior to upgrade. This is 
astra 28.2E
I have now deleted the card input for my DVB-S, and then rescan (ignoring 
encrypted channels). Now I have only 300 channels non-conflicting, whereas 
there were >780 previously. 100 conflicting channels (about the same).

No other 'relevant' changes were made (upgraded to NVIDIA download rather 
than Fedora distributed NVIDIA drivers, don't see how this can be relevant).
Not that I think it is relevant to this issue, but my DVB-S are on a slave 
BE only.
Regards,
Gareth


lcpsi



04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23880/1/2/3 
PCI Video and Audio Decoder (rev 05)
        Subsystem: Hauppauge computer works Inc. Device 6906
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data <?>
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: cx8800
        Kernel modules: cx8800

04:00.1 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI 
Video and Audio Decoder [Audio Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Device 6906
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: cx88_audio
        Kernel modules: cx88-alsa

04:00.2 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI 
Video and Audio Decoder [MPEG Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Device 6906
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: cx88-mpeg driver manager
        Kernel modules: cx8802

04:00.4 Multimedia controller: Conexant Systems, Inc. CX23880/1/2/3 PCI 
Video and Audio Decoder [IR Port] (rev 05)
        Subsystem: Hauppauge computer works Inc. Device 6906
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 3
        Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-