[mythtv] new DVB-T card doesn't record

[David Shirley]

Hi All,

I got a new DVB-T card (Leadtek Winfast DTV1000-T) its a LR6650 clone.

Anyways I built a new backend to test it and it doesn't work.

However if I make this new backend a slave to the other master backend then
the card works fine.

Also the card works with tzap/dvbstream->mplayer..

Any ideas?

Cheers
Dave

2005-10-12 09:35:34.567 Estimated program length: 60 minutes, size: 10406
MB, free space: 151976 MB
2005-10-12 09:35:34.576 TVRec(1): ClearFlags(AskAllowRecording,) ->
RunMainLoop,
2005-10-12 09:35:34.692 TVRec(1): ClearFlags(CancelNextRecording,) ->
RunMainLoop,
2005-10-12 09:35:34.829 Started recording: Heartbeat "Music of the Spheres":
channel 1007 on cardid 1, sourceid 1
2005-10-12 09:35:34.834 write -> 15 45
BACKEND_MESSAGE[]:[]SCHEDULE_CHANGE[]:[]empty
2005-10-12 09:35:34.852 read <- 14 19 QUERY_GETALLPENDING
2005-10-12 09:35:34.857 write -> 14 565 0[]:[]1[]:[]Heartbeat[]:[]Music of
the Spheres[]:[]A Polish music...
2005-10-12 09:35:35.840 TVRec(1): Changing from None to RecordingOnly
2005-10-12 09:35:35.860 TVRec(1):
ClearFlags(FrontendReady,CancelNextRecording,) -> RunMainLoop,
2005-10-12 09:35:35.876 TVRec(1): SetFlags(AskAllowRecording,) ->
RunMainLoop,AskAllowRecording,
2005-10-12 09:35:35.890 TVRec(1): Request: Program(yes) channel() input()
flags(Recording,)
2005-10-12 09:35:35.893 TVRec(1):
ClearFlags(WaitingForSIParser,SIParserRunning,) ->
RunMainLoop,AskAllowRecording,
2005-10-12 09:35:35.897 TVRec(1): ClearFlags(WaitingForSignal,) ->
RunMainLoop,AskAllowRecording,
2005-10-12 09:35:35.901 TVRec(1): ClearFlags(PENDINGACTIONS,) ->
RunMainLoop,AskAllowRecording,
2005-10-12 09:35:35.906 DVB#0 Opening DVB channel
2005-10-12 09:35:35.909 DVB#0 SetChannelByString(7)
2005-10-12 09:35:35.914 DVB#0 Frequency: 177500000 BW: 7MHz HP: 2/3 LP:
1/2C: QAM-64 TM: 8K H: None GI: 1/8
2005-10-12 09:35:35.917 DVB#0 Old Params: freq(219500000) type(OFDM)
2005-10-12 09:35:35.921 DVB#0 New Params: freq(177500000) type(OFDM)
2005-10-12 09:35:35.957 dvbchannel.cpp:wait_for_backend: Status: Signal,
2005-10-12 09:35:35.961 DVB#0 DVBChannel::Tune: Frequency tuning successful.
2005-10-12 09:35:35.965 DVB#0 Tuned to frequency for channel 7.
2005-10-12 09:35:35.969 TVRec(1): Starting Signal Monitor
2005-10-12 09:35:35.973 TVRec(1): SetupSignalMonitor()
2005-10-12 09:35:35.977 DVB#0 Opening DVB channel
2005-10-12 09:35:36.002 SM(0)::AddFlags: Seen() Match()
Wait(Sig,SNR,BER,UB,)
2005-10-12 09:35:36.005 DVBSM(0)::constructor(): initial flags 0x7400000
2005-10-12 09:35:36.009 TVRec(1): Signal monitor successfully created
2005-10-12 09:35:36.014 TVRec(1): Setting up table monitoring.
2005-10-12 09:35:36.017 TVRec(1): MPEG program number: 1328
2005-10-12 09:35:36.022 DTVSM(0)::SetProgramNumber(1328):
2005-10-12 09:35:36.025 SM(0)::RemoveFlags: Seen(PMT,) Match(PMT,) Wait()
2005-10-12 09:35:36.029 SM(0)::AddFlags: Seen() Match() Wait(PMT,)
2005-10-12 09:35:36.034 SM(0)::AddFlags: Seen() Match() Wait(PAT,PMT,)
2005-10-12 09:35:36.037 TVRec(1): Successfully set up MPEG table monitoring.
2005-10-12 09:35:36.041 SM(0)::Start: begin
2005-10-12 09:35:36.053 SM(0)::Start: end
2005-10-12 09:35:36.063 TVRec(1): SetFlags(SignalMonitorRunning,) ->
RunMainLoop,AskAllowRecording,SignalMonitorRunning,
2005-10-12 09:35:36.067 TVRec(1): SetFlags(WaitingForSignal,) ->
RunMainLoop,AskAllowRecording,WaitingForSignal,SignalMonitorRunning,
2005-10-12 09:35:36.069 TVRec(1): SetFlags(NeedToStartRecorder,) ->
RunMainLoop,AskAllowRecording,WaitingForSignal,NeedToStartRecorder,SignalMonitorRunning,
2005-10-12 09:35:36.469 JobQueue currently set at 3 job(s) max and to run
new jobs from 00:00 to 23:59
2005-10-12 09:35:36.474 JobQueue::GetJobsInQueue: findJobs search bitmask 4,
found 0 total jobs
2005-10-12 09:36:06.504 JobQueue currently set at 3 job(s) max and to run
new jobs from 00:00 to 23:59
2005-10-12 09:36:06.508 JobQueue::GetJobsInQueue: findJobs search bitmask 4,
found 0 total jobs
2005-10-12 09:36:15.503 read <- 14 35 QUERY_IS_ACTIVE_BACKEND[]:[]mythbox
2005-10-12 09:36:15.508 write -> 14 4 TRUE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mythtv.org/pipermail/mythtv-dev/attachments/20051012/651fa26b/attachment.html