[mythtv] Bug ?

Nicolas Strina nicolas.strina at ip-man.net
Wed Jun 23 08:14:55 EDT 2004 

Hello,

I just subscribed to the list. I'm finishing a few test on the 95h 
(Which is nearly giving me results) and i will post there.

Cu,

Nicolas

PS: Sorry for the mess

> Even this messages seems interesting enough for them because you sure 
> tried quite a number of versions and they might be interested in your 
> experiences with them.
>
> So off you go: https://lists.sourceforge.net/lists/listinfo/ivtv-devel
>
> :-)
>
> Cheers,
> -Tako
>
>
> Nicolas Strina wrote:
>
>> Re,
>>
>> Since this morning i did test with a few drivers Here is the list:
>>
>> ivtv-0.1.10-pre2-ck94p   ivtv-0.1.10-pre2-ck95h
>> ivtv-0.1.10-pre2-ck65b <ivtv-0.1.10-pre2-ck65b.tgz>
>> ivtv-0.1.10-pre2-ck69l
>>
>> The 94p seems to work but i still have snow on the screen ;) 
>> Certainly a tuner config problem.
>> I'm trying to fix the tuner with the 94p. If it works i will let you 
>> know otherwise i will try the 71d.
>>
>> Regards,
>>
>> Nicolas
>>
>> PS: Since i am free today i would be happy if my test can help the 
>> drivers devel.
>>
>>> Definitely for the ivtv list and Lucas is right those recent ck 
>>> patches differ wildly in usability and most of the time there is 
>>> more than one a day. I myself use 71d for quite some time now and it 
>>> works like a charm.
>>>
>>> But you might want to post your results to the ivtv list because 
>>> your feedback might very well help Chris and Hans to improve the 
>>> driver.
>>>
>>> Cheers,
>>> -Tako
>>>
>>> Nicolas Strina wrote:
>>>
>>>> Hello,
>>>>
>>>> In fact someone told me (on mythtv user ml) to come here to post 
>>>> the problem ;)
>>>> So let's try with your version.
>>>>
>>>> Cu,
>>>>
>>>> Nicolas
>>>>
>>>>> Hey Nicolas,
>>>>>
>>>>> You might want to try the ivtv mailing list.
>>>>> You always need to be careful which recent ck patch you get, 
>>>>> because they're a bit of a hit and miss.. a lot of different stuff 
>>>>> is being tried. FYI, I'm using 65b which works really well for me.
>>>>>
>>>>> Bye, Lucas
>>>>>
>>>>>
>>>>>> I'm using ivtv-0.1.10-pre2-ck95h since this morning. All the 
>>>>>> modules are loading fine but  .... I have nothing on the screen 
>>>>>> when i'm trying to watch the TV but a few colors sometimes ..
>>>>>> I'm running a Gentoo with a Kernel 2.6.5-r1 without any patches 
>>>>>> but the ones of gentoo. In Switzerland the tuner type seems to be 
>>>>>> 28 but i'm not 100% sure .. But i did test with type 3, 20 and 28 
>>>>>> and still the same.
>>>>>>
>>>>>> However i have this in dmesg:
>>>>>>
>>>>>> <snip>
>>>>>> saa7115: decoder set picture bright=127 contrast=64 saturation=64 
>>>>>> hue=0
>>>>>> saa7115: decoder set picture bright=127 contrast=63 saturation=64 
>>>>>> hue=0
>>>>>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 
>>>>>> hue=0
>>>>>> saa7115: decoder set picture bright=127 contrast=63 saturation=63 
>>>>>> hue=0
>>>>>> saa7115: decoder disable output
>>>>>> saa7115: decoder enable output
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>> ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
>>>>>>
>>>>>> Here is my modprobe.conf and the output of dmesg
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Nicolas
>>>>>>
>>>>>> alias char-major-61 lirc_i2c
>>>>>> alias char-major-81 videodev
>>>>>> alias char-major-81-0 ivtv
>>>>>> alias char-major-81-1 bttv
>>>>>> alias /dev/v4l ivtv
>>>>>> options ivtv ivtv_debug=1 tuner=28
>>>>>> options msp3400 once=1 simple=1
>>>>>> add below ivtv msp3400 saa7115 tuner saa7127
>>>>>> add above ivtv lirc_dev lirc_i2c ivtv-fb
>>>>>>
>>>>>> Linux video capture interface: v1.00
>>>>>> saa7127: video encoder driver version V 0.3 loaded
>>>>>> ivtv: version 0.1.10 (0.1.10pre2-ck95h) loading
>>>>>> ivtv: Autodetected WinTV PVR 350rev1 card
>>>>>> ivtv: Found an iTVC15 based chip
>>>>>> ivtv: pci: PCIBUS detected device: 0x2578 vendor: 0x8086
>>>>>> msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) 
>>>>>> mode, simpler (G) no-thread mode
>>>>>> msp34xx: $Id$ compiled on: Jun 23 2004 12:03:55
>>>>>> ivtv: i2c attach [client=MSP3418W-A2,ok]
>>>>>> saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
>>>>>> saa7115: detecting saa7115 client on address 0x42
>>>>>> saa7115: writing init values
>>>>>> ivtv: i2c attach [client=saa7115[0],ok]
>>>>>> saa7115: status: (1E) 0x50, (1F) 0xc0
>>>>>> tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
>>>>>> ivtv: i2c attach [client=(tuner unset),ok]
>>>>>> saa7127: Selecting NTSC video Standard
>>>>>> saa7127: Selecting S-Video+Composite
>>>>>> saa7127: Turn WSS off
>>>>>> saa7127: Widescreen Mode 4:3 Full Format
>>>>>> saa7127: Selecting Normal Encoder Input
>>>>>> saa7127: Enable Video Output
>>>>>> ivtv: i2c attach [client=saa7127[0],ok]
>>>>>> tveeprom: Hauppauge: model = 48134, rev = J347, serial# = 7112005
>>>>>> tveeprom: tuner = LG TP18PSB01D (idx = 47, type = 28)
>>>>>> tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
>>>>>> tveeprom: audio_processor = CS5331 (type = 9)
>>>>>> ivtv: i2c attach [client=tveeprom[0],ok]
>>>>>> ivtv: Tuner Type 28, Tuner formats 0x00000007, Radio: yes, Model 
>>>>>> 0x00a93517, Revision 0x00000001
>>>>>> ivtv: PAL tuner detected
>>>>>> ivtv: Radio detected
>>>>>> ivtv: Encoder revision: 0x02040011
>>>>>> ivtv: Decoder revision: 0x02020023
>>>>>> ivtv: Configuring WinTV PVR 350rev1 card with 10 streams
>>>>>> ivtv: Create DMA stream 0 using 128 buffers of size 32768
>>>>>> ivtv: Create DMA stream 1 using 128 buffers of size 32768
>>>>>> ivtv: Create stream 2 using 64 buffers of size 32768
>>>>>> ivtv: Create DMA stream 3 using 32 buffers of size 32768
>>>>>> ivtv: Create stream 4
>>>>>> ivtv: Create DMA stream 5 using 128 buffers of size 32768
>>>>>> ivtv: Create stream 6 using 64 buffers of size 32768
>>>>>> ivtv: Create DMA stream 8 using 124 buffers of size 32768
>>>>>> ivtv: Create stream 7
>>>>>> ivtv: Create DMA stream 9 using 512 buffers of size 32768
>>>>>> ivtv: Setting Tuner 28
>>>>>> tuner: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) by ivtv i2c 
>>>>>> driver #0
>>>>>> tuner: TV freq (201587992.00) out of range (44-958)
>>>>>> ivtv: Setting audio matrix to input 3, output 1
>>>>>> ivtv: Switching standard to PAL.
>>>>>> tuner: TV freq (201587992.00) out of range (44-958)
>>>>>> saa7115: decoder set norm PAL
>>>>>> saa7115: set audio: 0x01
>>>>>> saa7127: Setting Encoder Video Standard
>>>>>> saa7127: Set PAL Video Mode
>>>>>> saa7127: Selecting PAL video Standard
>>>>>> ivtv: Initialized WinTV PVR 350rev1, card #0
>>>>>> lirc_dev: IR Remote Control driver registered, at major 61
>>>>>> bttv: driver version 0.9.12 loaded
>>>>>> bttv: using 8 buffers with 2080k (520 pages) each for capture
>>>>>> ivtv: i2c attach [client=Hauppauge IR,ok]
>>>>>> lirc_dev: lirc_register_plugin:sample_rate: 6
>>>>>> ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
>>>>>> ivtv-osd: screen coords: [0 0] -> [720 576]
>>>>>> ivtv-osd: original global alpha = 208
>>>>>> ivtv-osd: current OSD state = 39
>>>>>> ivtv-osd: new global alpha = 208 (1 255 0)
>>>>>> ivtv-osd: Good video_base is inside valid allocated space.
>>>>>> ivtv-osd: framebuffer at 0xd9510000, mapped to 0xe2a58000, size 
>>>>>> 1665k
>>>>>> ivtv-osd: mode is 720x576x32, linelength=2880
>>>>>> ivtv-osd: fb0: iTVC15 TV out frame buffer device
>>>>>> EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 
>>>>>> filesystem as ext2
>>>>>> ivtv: Switching standard to PAL.
>>>>>> tuner: TV freq (201587992.00) out of range (44-958)
>>>>>> saa7115: decoder set norm PAL
>>>>>> saa7115: set audio: 0x01
>>>>>> saa7127: Setting Encoder Video Standard
>>>>>> saa7127: Set PAL Video Mode
>>>>>> saa7127: Selecting PAL video Standard
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> mythtv-dev mailing list
>>>>>> mythtv-dev at mythtv.org
>>>>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>>>>
>>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------ 
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> mythtv-dev mailing list
>>>>> mythtv-dev at mythtv.org
>>>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>>>  
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> mythtv-dev mailing list
>>>> mythtv-dev at mythtv.org
>>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> mythtv-dev mailing list
>>> mythtv-dev at mythtv.org
>>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>>>
>>
>>
>> _______________________________________________
>> mythtv-dev mailing list
>> mythtv-dev at mythtv.org
>> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>
>
>
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev at mythtv.org
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-dev
>

More information about the mythtv-dev mailing list