[mythtv] Bug ?

[Nicolas Strina]

Hello,

I'm using ivtv-0.1.10-pre2-ck95h since this morning. All the modules are 
loading fine but  .... I have nothing on the screen when i'm trying to 
watch the TV but a few colors sometimes ..
I'm running a Gentoo with a Kernel 2.6.5-r1 without any patches but the 
ones of gentoo. In Switzerland the tuner type seems to be 28 but i'm not 
100% sure .. But i did test with type 3, 20 and 28 and still the same.

However i have this in dmesg:

<snip>
saa7115: decoder set picture bright=127 contrast=64 saturation=64 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=64 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder set picture bright=127 contrast=63 saturation=63 hue=0
saa7115: decoder disable output
saa7115: decoder enable output
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...
ivtv: ivtv_enc_timeout: Trying to wakeup encoder...

Here is my modprobe.conf and the output of dmesg

Thanks,

Nicolas

alias char-major-61 lirc_i2c
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 bttv
alias /dev/v4l ivtv
options ivtv ivtv_debug=1 tuner=28
options msp3400 once=1 simple=1
add below ivtv msp3400 saa7115 tuner saa7127
add above ivtv lirc_dev lirc_i2c ivtv-fb

Linux video capture interface: v1.00
saa7127: video encoder driver version V 0.3 loaded
ivtv: version 0.1.10 (0.1.10pre2-ck95h) loading
ivtv: Autodetected WinTV PVR 350rev1 card
ivtv: Found an iTVC15 based chip
ivtv: pci: PCIBUS detected device: 0x2578 vendor: 0x8086
msp34xx: init: chip=MSP3418W-A2, has NICAM support, simple (D) mode, 
simpler (G) no-thread mode
msp34xx: $Id$ compiled on: Jun 23 2004 12:03:55
ivtv: i2c attach [client=MSP3418W-A2,ok]
saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x50, (1F) 0xc0
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
tveeprom: Hauppauge: model = 48134, rev = J347, serial# = 7112005
tveeprom: tuner = LG TP18PSB01D (idx = 47, type = 28)
tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x00000007)
tveeprom: audio_processor = CS5331 (type = 9)
ivtv: i2c attach [client=tveeprom[0],ok]
ivtv: Tuner Type 28, Tuner formats 0x00000007, Radio: yes, Model 
0x00a93517, Revision 0x00000001
ivtv: PAL tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350rev1 card with 10 streams
ivtv: Create DMA stream 0 using 128 buffers of size 32768
ivtv: Create DMA stream 1 using 128 buffers of size 32768
ivtv: Create stream 2 using 64 buffers of size 32768
ivtv: Create DMA stream 3 using 32 buffers of size 32768
ivtv: Create stream 4
ivtv: Create DMA stream 5 using 128 buffers of size 32768
ivtv: Create stream 6 using 64 buffers of size 32768
ivtv: Create DMA stream 8 using 124 buffers of size 32768
ivtv: Create stream 7
ivtv: Create DMA stream 9 using 512 buffers of size 32768
ivtv: Setting Tuner 28
tuner: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) by ivtv i2c driver #0
tuner: TV freq (201587992.00) out of range (44-958)
ivtv: Setting audio matrix to input 3, output 1
ivtv: Switching standard to PAL.
tuner: TV freq (201587992.00) out of range (44-958)
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard
ivtv: Initialized WinTV PVR 350rev1, card #0
lirc_dev: IR Remote Control driver registered, at major 61
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
ivtv: i2c attach [client=Hauppauge IR,ok]
lirc_dev: lirc_register_plugin:sample_rate: 6
ivtv-osd: Framebuffer module loaded (attached to ivtv card id 0)
ivtv-osd: screen coords: [0 0] -> [720 576]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: Good video_base is inside valid allocated space.
ivtv-osd: framebuffer at 0xd9510000, mapped to 0xe2a58000, size 1665k
ivtv-osd: mode is 720x576x32, linelength=2880
ivtv-osd: fb0: iTVC15 TV out frame buffer device
EXT2-fs warning (device hda1): ext2_fill_super: mounting ext3 filesystem 
as ext2
ivtv: Switching standard to PAL.
tuner: TV freq (201587992.00) out of range (44-958)
saa7115: decoder set norm PAL
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set PAL Video Mode
saa7127: Selecting PAL video Standard