[mythtv] DVB-T

Kenneth Aafløy ke-aa at frisurf.no
Sat Aug 2 00:51:34 EDT 2003


Ben Bucksch wrote:
> Kenneth Aafløy wrote:
> > My status on this is:
> >    - Nearly there with CAM support (from vdr)
>
> Can you explain that? What does it do?

Well, ce bottom!!

> Use the hardware CAM module? What's the advantage over using the
> firmware for that?

I have a Conax CAM with subscription!

> Soft-CAM? Which encryption methods are supported? Is it legal for you
> (not EU) to offer that publically? (Compare DeCSS case, which was
> Norway.) If so, that would be great.

Won't touch SoftCAM, and I think all SoftCAM discussion on this list
should be denied!

> (Or you could just wait with the explanation until you're done.)
No!!!

> > And also you might be confused about the fact that the dvb
> > drivers has v4l support (DVB==v4l1 | dvb-kernel==v4l2(v4l1 compat)).
> V4L support in howfar? What does the /dev/video device output? What
> happens, if I try to tune like I do analog tuner devices?
I think it gives a ioctl error, use 's/t/czap' instead,
then you can read the decoded in /dev/video.
(I think this is only on full cards!!)


Kenneth.



Starting up as the master server.
DVBChannel: Changing to channel 7 on card 0
Using DVB card "STV0299/TSA5059/SL1935 based"
tuning DVB-S to L-Band:1084831688, Pol:v Srate=24500000, 22kHz=off
polling....
Getting frontend event
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
Bit error rate: 16896
Signal strength: 43506
SNR: 49620
FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI
FE_HAS_SYNC
2003-08-01 23:43:52 adding: europa.io.no as a player 1
2003-08-01 23:43:52 adding: europa.io.no as a player 0
2003-08-01 23:43:52 adding: europa.io.no as a player 0
2003-08-01 23:43:52 adding: europa.io.no as a remote ringbuffer
Changing from None to WatchingLiveTV
Resetting slot 0...ok.
Resetting slot 1...ok.
Setting 2 pids < 512[0x0200]  653[0x028D] > done!
Module ready in slot 0
Creating connection: slot 0, tcid 1
OpenSession 00010041
New Resource Manager (session id 1)
1: ==> Profile Enq
1: <== Profile
1: ==> Profile Change
1: <== Profile Enquiry
1: ==> Profile
OpenSession 00020041
New Application Information (session id 2)
2: ==> Application Info Enq
2: <== Application Info
CAM: Conax 4.00e, 01, 0B00, 04B1
OpenSession 00030041
New Conditional Access Support (session id 3)
3: ==> Ca Info Enq
3: <== Ca Info 0B00
-----------> PAT: [301 -> 256]PMT
Videostream: ASPECT: 4:3  Size = 704x576  FRate: 25 fps  BRate: 15.00 Mbit/s
Audiostream: Layer: 1  BRate: 32 kb/s  Freq: 48.0 kHz



More information about the mythtv-dev mailing list