[mythtv] WinTV GO and btaudio... no sound
Fri, 20 Dec 2002 14:45:50 -0500
Also try messing with the sampling rate. My card (Avermedia WinTV Studio)
didn't like anything but 32k. Otherwise, there'd be a hum or a hiss.
[mailto:firstname.lastname@example.org]On Behalf Of Nathan Langley
Sent: Friday, December 20, 2002 12:39 PM
Subject: Re: [mythtv] WinTV GO and btaudio... no sound
I was have some sound noise issues. I got the btaudio working but I was
still having the issue. My recordings have a background hum I cant seem
to get rid of. Im going to try a diff tuner card soon. I cant
rememeber what I did but I will check tonight when I get home and send
what I can.
On Fri, 2002-12-20 at 10:47, m0j0.j0j0 wrote:
> Has anyone had any luck with a WinTV GO 190 and btaudio?
> I've been unable to get decent sound using the loopback cable and my
> onboard soundcard line-in, so I thought this may be a better option. It
> would be nice if I didn't need to add a "real" soundcard to this box.
> Here's the output from when I load the btaudio driver.
> btaudio: Bt878 (rev 17) at 00:0b.1, irq: 5, latency: 32, mmio:
> btaudio: using card config "default"
> btaudio: registered device dsp1 [digital]
> btaudio: registered device dsp2 [analog]
> btaudio: registered device mixer1
> Here's the text output from aplay.
> % aplay /dev/dsp2
> Playing raw data '/dev/dsp2' : Unsigned 8 bit, Rate 8000 Hz, Mono
> I've attempted to tweak every setting in kmix. kmix shows 3 lines for
> the bt878, but nothing I do seems to make any sound actually play.
> Any thoughts?
> mythtv-dev mailing list
mythtv-dev mailing list