[mythtv] voodoo 3500 (very newbie)
Kevin D. Timm
mythtv-dev@snowman.net
Fri, 13 Dec 2002 00:09:57 -0600
I tried your suggestions (Roberto) and have been having better
luck, I just can't get it to modprobe the bttv in yet. I get:
/lib/modules/2.4.19-16mdk/kernel/drivers/media/video/bttv.o.gz: init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod
/lib/modules/2.4.19-16mdk/kernel/drivers/media/video/bttv.o.gz failed
modprobe: insmod bttv failed
dmesg reports:
Linux video capture interface: v1.00
bttv: driver version 0.7.96 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT82C597 [Apollo VP3]
bttv: Host bridge is VIA Technologies, Inc. VT82C596 Power Management
lspci -v reports:
01:00.0 VGA compatible controller: 3Dfx Interactive, Inc. Voodoo 3 (rev 01)
(prog-if 00 [VGA])
Subsystem: 3Dfx Interactive, Inc. Voodoo3 3500 TV (NTSC)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort-<MAbort- >SERR- <PERR+
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=32M]
Region 2: I/O ports at d000 [size=256]
Expansion ROM at e6000000 [disabled] [size=64K]
Capabilities: [54] AGP version 1.0
Status: RQ=7 SBA+ 64bit+ FW- Rate=x1,x2
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Additionally, lsmod returns (there are many more, but I insmod'd all of
these):
Module Size Used by Not tainted
tuner 9536 0 (unused)
i2c-voodoo3 2604 0 (unused)
i2c-algo-bit 7432 2 [i2c-voodoo3]
i2c-dev 4420 0 (unused)
i2c-core 15332 0 [tuner i2c-algo-bit i2c-dev]
tdfx 31524 0 (unused)
Too much information?
TIA,
KT
-----Original Message-----
From: mythtv-dev-admin@snowman.net
[mailto:mythtv-dev-admin@snowman.net]On Behalf Of Bertus
Sent: Thursday, December 12, 2002 9:31 PM
To: mythtv-dev@snowman.net
Subject: Re: [mythtv] voodoo 3500 (very newbie)
It seams too simple to me, but you might want to try this:
TV
Escrito por: Anónimo sobre 20/05 01:57
Hola..
Proba levantando el tuner primero de esta manera: (try modporbing
the tuner first)
modprobe tuner type=5
Bien ahora si levanta bien el modulo del tuner, tendrias que levantar
el modulo del bttv que de esta manera:
(Well, if it works, you would have to try modprobing the bttv module,
this way:)
modprobe bttv card=0x44
Ahora tendrias que poder ver la tele =) con el xawtv (aunque el xawtv
lo vas a tener que configurar para pal-nc y listo) (Now you should have
to be able to watch tv with xawtv [you might have to configure xawtv for
pal-nc and we are done])
Suerte
(good luck)
Found here:
http://www.starlinux.net/article.php?story=20020519134854194#comments
Roberto
P.S.: Excuse the poor translation...
----- Original Message -----
From: "Cecil Watson" <cwatson@linkline.com>
To: <mythtv-dev@snowman.net>
Sent: Thursday, December 12, 2002 7:25 PM
Subject: Re: [mythtv] voodoo 3500 (very newbie)
> On Wednesday 11 December 2002 07:58 pm, Kevin D. Timm wrote:
> > I see that v4l (supposedly) supports the 3dfx 3500 TV card,
> > but I can't find any way to load this card in mythtv. Am
> > I this dense or what am I missing?
> >
> > I can make the kernel, compile v4l support in, i2c support
> > in, but what modules do I have to modprobe/insmod? I'm
> > just lost here.
> >
> > TIA
> >
> > KT
> >
> > ---
> > Outgoing mail is certified Virus Free.
> > Checked by AVG anti-virus system (http://www.grisoft.com).
> > Version: 6.0.419 / Virus Database: 235 - Release Date: 11/13/2002
> >
> > _______________________________________________
> > mythtv-dev mailing list
> > mythtv-dev@snowman.net
> > http://www.snowman.net/mailman/listinfo/mythtv-dev
>
> You may want to start here: http://v3tv.sourceforge.net/
>
> Cecil
>
> _______________________________________________
> mythtv-dev mailing list
> mythtv-dev@snowman.net
> http://www.snowman.net/mailman/listinfo/mythtv-dev
>
_______________________________________________
mythtv-dev mailing list
mythtv-dev@snowman.net
http://www.snowman.net/mailman/listinfo/mythtv-dev
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 11/13/2002
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.419 / Virus Database: 235 - Release Date: 11/13/2002