[mythtv-commits] Ticket #9508: Problem with CI Card

[MythTV]

#9508: Problem with CI Card
------------------------------+----------------------------------
 Reporter:  gludie@…          |           Type:  Bug Report
   Status:  new               |       Priority:  minor
Milestone:  unknown           |      Component:  MythTV - General
  Version:  Unspecified       |       Severity:  medium
 Keywords:                    |  Ticket locked:  0
------------------------------+----------------------------------
 Hi,

 I hope this issue is worth a ticket, but I now searched a lot for a
 similar problem, but did not find anything.

 Symptom:
 If I insert a cam module (alphacrpyt light) into the CI module, mythtv
 hangs with Status "L_ _ ". Independently if FTA or scrambled.
 If I disconnect the cam, the status immediatly changed to LMS and current
 channel can be watched.

 If I reinsert the cam module - same story as before ... hangs with status
 L__

 What did I check:
 ==dmesg==
  2557.060154] adapter has MAC addr = 00:d0:5c:24:1d:a5
 [ 2557.066324] input: Budget-CI dvb ir receiver saa7146 (0) as
 /devices/pci0000:00/0000:00:1e.0/0000:0a:0c.0/input/input7
 [ 2557.072464] budget_ci: CI interface initialised
 [ 2557.196281] dvb_ca adapter 1: DVB CAM detected and initialised
 successfully
 [ 2557.276213] DVB: registering adapter 1 frontend 0 (ST STV0299 DVB-S)...
 [ 2784.312153] dvb_ca adapter 1: DVB CAM detected and initialised
 successfully

 The card itself worked this afternoon, and I did not exactly know, if it
 is in relation with a change in udev. I tried to create links with a own
 udev rules, because I have two adapters, but at the moment I disabled it
 and work with the automatic assigned adapter ids.

 Distribution: ubuntu 10.04 lts
 mythtv: 0-23-fixes
 cards: Hauppage Nova S PCI CI , Technisat Skystar 2 rev2.8
 0a:0a.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
 chip / Technisat SkyStar2 DVB card (rev 02)
 0a:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705_2
 Gigabit Ethernet (rev 03)
 0a:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)

 0a:0a.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB
 chip / Technisat SkyStar2 DVB card (rev 02)
         Subsystem: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
 Technisat SkyStar2 DVB card
         Flags: bus master, slow devsel, latency 32, IRQ 22
         Memory at d0000000 (32-bit, non-prefetchable) [size=64K]
         I/O ports at 4000 [size=32]
         Kernel driver in use: b2c2_flexcop_pci
         Kernel modules: b2c2-flexcop-pci

 0a:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
         Subsystem: Technotrend Systemtechnik GmbH Device 100f
         Flags: bus master, medium devsel, latency 123, IRQ 20
         Memory at d0020000 (32-bit, non-prefetchable) [size=512]
         Kernel driver in use: budget_ci dvb
         Kernel modules: budget-ci


 Please let me know, if further information needed

-- 
Ticket URL: <http://code.mythtv.org/trac/ticket/9508>
MythTV <http://code.mythtv.org/trac>
MythTV Media Center